EN 
TH 
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Long 3F Countersinks (90°)
Long 3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
3F Countersinks (60°)
3F Countersinks (60°)
Countersink 60Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals.
1F Countersinks (30°)
1F Countersinks (30°)
Countersink 45Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
1F Countersinks (45°)
1F Countersinks (45°)
Countersink 45Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
1F Countersinks (60°)
1F Countersinks (60°)
Countersink 60Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum. It can be use to drill on thin or sheet materials.
The special design provide fast chip flow, and sharp re-grindable edge.
Available for choosing in sizes metric (millimeter), imperial (inch), and morse taper shank (MT).
Available for choosing in sizes metric (millimeter), imperial (inch), and morse taper shank (MT).
1F Countersinks (82°)
1F Countersinks (82°)
Countersink 82Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum. It can be use to drill on thin or sheet materials.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
Available for choosing in sizes metric (millimeter), imperial (inch).
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
Available for choosing in sizes metric (millimeter), imperial (inch).
1F Countersinks (90°)
1F Countersinks (90°)
Countersink 90Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum. It can be use to drill on thin or sheet materials.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
Available for choosing in sizes metric (millimeter), imperial (inch), and morse taper shank (MT).
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
Available for choosing in sizes metric (millimeter), imperial (inch), and morse taper shank (MT).
1F Countersinks (100°)
1F Countersinks (100°)
Countersink 100Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
It can be use to drill on thin or sheet materials. The special design provide fast chip flow, and sharp regrindable edge.
1F Countersinks (120°)
1F Countersinks (120°)
Countersink 120Degree 1Flute for deburring and chamfering holes. The design is suitable for soft material such as wood, plastic, and aluminum. It can be use to drill on thin or sheet materials.
The special design provide fast chip flow, and sharp regrindable edge.
Available for choosing in straight shank, and morse taper shank (MT).
Available for choosing in straight shank, and morse taper shank (MT).
Countersinks with Hole (60°)
Countersinks with Hole (60°)
60Degree Hole Deburr Countersink for smooth deburring of holes, and light chamfering. Suitable on light metal such as aluminum, and plastic. Available for choosing in sizes metric (millimeter), imperial (inch), and morse taper shank (MT).
Countersinks with Hole (90°)
Countersinks with Hole (90°)
90Degree Hole Deburr Countersink for smooth deburring of holes, and light chamfering. Suitable on light metal such as aluminum, and plastic. Available for choosing in sizes metric (millimeter), imperial (inch), and morse taper shank (MT).
Auto Lock Chuck
Auto Lock Chuck
Auto Lock Chuck for using countersinks by hand. Sold in full set or separately. Handle Model 06400200000 : Chuck handle for countersink bit Tool Bits Model 06403 : 3 flutes 90° countersink bits Set 06403000001 / 06403000002 : Set with handle and 4pcs countersink bits
Bi-Face
Bi-Face
Bi-face double countersink in one tool. Back and front countersinking as well as milling side V-groove and O-Ring slots with machining center. This product is specially designed for multi-purpose machining to save time and cost.
Choose from angle 90° and 60°
Choose from angle 90° and 60°
Countersinks
Countersinks ดอกผายปาก แชมเฟอร์ขอบ ตัวเลือกเคาเตอร์ซิง 3ฟัน 1ฟัน แบบมีรู องศา 30°, 60°, 82°, 90°, 100°, 120° วัสดุ ไฮสปีดสตีล คาร์ไบด์
การใช้ดอกเคาเตอร์ซิงค์ (Countersink) เป็นวิธีเพื่อสร้างทรงกรวยในบริเวณปากของรูเจาะ เพื่อให้หัวของน๊อตหรือสกรูพอดีและไม่โผล่เหนือผิวงาน หรือเพื่อลบคมบริเวณปากรูไม่ให้คมเกินไป ประโยชน์หลักของการใช้ดอกเคาเตอร์ซิงค์คือการสร้างผิวงานที่เรียบและสวยงาม ช่วยให้หัวสกรูหรือน๊อตจมอยู่กับผิวงานได้อย่างลงตัว นอกจากนี้ยังช่วยลดความเสี่ยงของการเสียดสีและสึกหรอในผิวงานที่อาจเกิดจากหัวสกรูที่โผล่ออกมา
ประเภทของดอกเคาเตอร์ซิงค์ (Countersink) ตามรูปทรง (ฟอร์ม FORM)
- 3 ฟัน : จำนวนคมกัดมากเหมาะกับวัสดุแข็งเช่นเหล็กเหนียว
- 1 ฟัน : ร่องคายเศษใหญ่เหมาะกับวัสดุทั่วไปเช่น ไม้ อลูมินัม
- มีรู : ร่องคายเศษออกด้านบนเหมาะกับวัสดุที่เศษติดกันเช่น อลูมินัม และ พลาสติก
- ไบเฟส : มีมุมทั้งด้านบนและด้านล่าง เหมาะสำหรับทำงานพิเศษเช่นทำมุมในรู