EN 
TH 
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Vertical Hold-Down Toggle Clamp
Vertical Hold-Down Toggle Clamp
Vertical Hold-Down Toggle Clamp with nylon tip to prevent tool damage. The tip can be removed if needed.
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
Vertical Hold-Down Toggle Clamp (Solid Arm)
Vertical Hold-Down Toggle Clamp (Solid Arm)
Tapped hole on the end of solid arm for choosing your own hold down head.
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Mold Clamp
Mold Clamp
Mold Clamp 11MC series for variable height clamping of mold and die base. Mold Clamp do not require additional support. For using with T-Slot table, use with T-Nut.
- Normal type come with threaded studs, for use with T-Nut or install into threaded holes.
- T-Bolt type (2nd table) follow with code A or B, come with T-Bolt ready for use with T-Slot tables.
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
Vertical Hold-Down Toggle Clamp (Straight Base)
Vertical Hold-Down Toggle Clamp (Straight Base)
Straight base hold down toggle clamp.
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Forged Goose Neck Clamp
Forged Goose Neck Clamp
Forged Goose Neck shaped clamp. Made with forged steel for heavy duty works.
Forged Mold Clamp
Forged Mold Clamp
Forged Mold Clamp 11MCF serie for variable height clamping of mold and die base. The clamp body is forged for extra strength. Mold Clamp do not require additional support.
- Normal type come with threaded studs, for use with T-Nut or install into threaded holes.
- T-Bolt type (2nd table) follow with code A or B, come with T-Bolt ready for use with T-Slot tables.
Piloted Countersinks (90°)
Piloted Countersinks (90°)
90degree Magafor Piloted Countersinks for boring tapered screw cap holes.
NF-E66023 / DIN 1866 / ISO
Ball Micro End Mills
Ball Micro End Mills
Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.
Short and Extra Short model.
Center Drill (Form A) Old JIS
Long Center Drill (Form A)
Center Drill Old Japanese JIS standard 60 degree available in HSSE.
Carbide NC Drill 90°
Carbide NC Drill 90°
Carbide NC Drill (90°) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
Long 3F Countersinks (90°)
Long 3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Vertical Hold-Down Toggle Clamp (T-Handle)
Vertical Hold-Down Toggle Clamp (T-Handle)
Hold down toggle clamp with t handle
Step Drills Long Type 90°
Step Drills Long Type 90°
Drilling standardized tapered 90° capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Hand Taper Pin Reamers
Hand Taper Pin Reamers
High speed steel taper reamer Magafor 700 / 720. Hand Taper Pin Reamer for hand reaming of tapered holes. Available in sprial flutes and straight flutes. Reaming taper 2% or 1:50 or 1° 08´
DIN 9 / NFE 066011
DIN 9 / NFE 066011
Tapped End Mold Clamp
Tapped End Mold Clamp
Tapped End Mold Clamp 11TTUC for clamping mold and die base, the clamping height is adjustable. Set included the clamp and threaded support.
Micro End Mills
Micro End Mills
Magafor Micro Precision End Mills super micro end mills as small as diameter 0.10mm.
Center Drill (Form A) Old JIS
Center Drill (Form A) Old JIS
Carbide NC Drill 120°
Carbide NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 120 degree NC Spotting Drill hole will provide a stability for drill.
By drilling hole using smaller diameter drill over the 120 degree NC Spotting Drill hole will provide a stability for drill.
Hold-Down Toggle Clamp (Right Angle Base)
Hold-Down Toggle Clamp (Right Angle Base)
Vertical hold-down toggle clamp with right angle base.
High Precision Machine Reamers
High Precision Machine Reamers
Spiral flute high precision machine reamers Magafor 600 / 8600. High speed steel with cobalt and carbide for hard material.
Selection 0.1mm size increment.
DIN 212-B / NFE 066014
Selection 0.1mm size increment.
DIN 212-B / NFE 066014
Step Drill 180°
Step Drill 180°
Step Drill 180Deg for standardized cap-screw hole in one operation. This simple tool can reduce time and save cost from drilling and counterboring.
Stepped Strap Clamp
Stepped Strap Clamp
Stepped Strap Clamp 11TSSC serie for work holding on machines and molds.
Forged Tapped End Mold Clamp
Forged Tapped End Mold Clamp
Forged Tapped End Mold Clamp for clamping mold and die base, the clamping height is adjustable. Set included the clamp and threaded support.
Center Drill (Form A) UK Type
Center Drill (Form A) UK Type
BS standard drills inch type center drills (Form A) 60° UK type.
BS No.1 : 1/8 x 3/64
BS No.2 : 3/16 x 1/16
BS No.3 : 1/4 x 3/32
BS No.4 : 5/16 x 1/8
BS No.5 : 7/16 x 3/16
BS No.6 : 5/8 x 1/4
BS No.7 : 3/4 x 5/16
BS No.1 : 1/8 x 3/64
BS No.2 : 3/16 x 1/16
BS No.3 : 1/4 x 3/32
BS No.4 : 5/16 x 1/8
BS No.5 : 7/16 x 3/16
BS No.6 : 5/8 x 1/4
BS No.7 : 3/4 x 5/16
Carbide NC Drill 140°
Carbide NC Drill 140°
140 degree NC Spotting Drill for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
Conical Taper Drill 20°
Conical Taper Drill 20°
Conical Taper Drill 20° designed for drilling sheet metal up to 3mm. One drill bit can drill several hole sizes up to the large diameter. Select the drill bit from the hole size capacity table.
3F Countersinks (60°)
3F Countersinks (60°)
Countersink 60Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals.
Hold-Down Toggle Clamp (Drop Handle)
Hold-Down Toggle Clamp (Drop Handle)
Hold-down toggle clamp with drop handle.
