Shop - ซันไรส์

Center Drill (Form A)

Standard center drills (Form A) 60° Magafor
Available in materials

High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide

Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1

DUO-MAG Double NC Drill

Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.

Step Drills Before Thread

Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.

3F Countersinks (90°)

Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.

Hand Countersink and Blade (C)

Grattec Countersink Bits C

Countersink blade (C size) and handle for hole deburring by hand. Grattec yellow handle with interchangeable countersink tool bits.

Handles and Holders

Replacement handles for blades. Choose suitable handle for Grattec and Noga swivel blades (E / B / or others types)

Hand Reamers

High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019

Counterbores 180°

Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.

NF-E66024 / DIN 373 / ISO

Grattec Round Blades N

Round replacement blades are used with metal edge deburring devices and longitudinal key grooves such as stainless steel sheets, metal plates. Compatible with Grattec and Noga handles

Swivel Blades Heavy Duty (E)

ใบมีดงอ ใบมีดลูบคม ลบครีบ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 3.2มม (ขนาด E) สามารถใช้ได้กับด้ามจับขนาด 3.2มม ทั้ง Grattec และ Noga

Grattec Scraper Blades T

Scraper with handle and scraper blades (T) for shaft and surface scraping. Set with Grattec yellow handle come with interchangeable scraper tool bit.

Ceramic Blade

Grattec Ceramic Blade

Ceramic Blade for flashing and deburring soft materials such as plastic, aluminum. Ceramic blades provide safer deburring for workers, and do not damage soft workpieces as much as sharp steel blade.

mini Set

ชุดสำหรับการตกแต่งชิ้นงานขนาดเล็ก เหมาะสำหรับงานที่ต้องการความ ละเอียดอ่อนสูง ทุกชิ้นมีด้ามจับขนาดเล็กเหมาะมือ 1 x Scraper Blade 08GT-D50 1 x Straight Edge Deburring 08GT-E150 1 x 0-3mm Countersink 08GT-BC3200

Center Drill with Flat (Form A)

Center Drill (Form A) Non Standard

Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.

NC Drill 90°

90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.

NFE 66052 / ISO 10898

Step Drills Before Thread (Carbide)

Drill and countersink hole before threading standard M thread.

Special harder carbide model for mass production.

Sold out

3F Countersinks (90°) MT Shank

3F Countersinks (90°) MT Shank (Morse Taper) for deburring and chamfering holes and edges. The design is suitable for hard material such as metals.

Hand Countersink and Swivel Blade (E)

Grattec Countersink Bits E

Swivel and Rotating countersink and external countersink blade (E size except 08EL3500GT) with handle for hole and rods end deburring by hand. Grattec yellow handle with interchangeable countersink tool bit.

Double Edge Tool and Blades (K)

Grattec Double Edge Deburring Tools

Simultaneously removes burrs from both sides of sheet metal or keyways. The handle come with hand guard to prevent injury during use. Sheet thickness range 0-12mm.

Grattec Ceramic Deburring Tools

A set of ceramic knives and ceramic blades for decoration, scraping or deburring soft materials such as plastic, aluminum.

Hand Reamer Paris Type

High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112

Counterbores Taper Shank 180°

Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.

NF-E66024 / DIN 373 / ISO

Swivel Blades Light Duty (B)

ใบมีดงอ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 2.6มม (ขนาด B) สามารถใช้ได้กับด้ามจับขนาด 2.6มม ทั้ง Grattec และ Noga

Grattec Scraper Blades D

Scraper blade for sharp scraping and mold surface scraping, used with Grattec and Noga metal surface scraping handle, size D

Grattec Box

ชุดเครื่องมือ Grattec รวบรวมใบมีดชนิดต่างๆไว้ด้วยกันในราคาประหยัด พร้อมกล่องใส่สวยงาม ในกล่องบรรจุ - Double Burr DB2000GT - Universal Handle EL1000GT - Blade Holder EL0103GT - Blade Holder EL0200GT - Blade Holder EL0300GT+GT-C20 - Blade Holder EL0400GT+GT-N80K - Blade Holder EL0500GT+GT-D50 - Blade Holder EL0500GT+GT-D66 - Hex Key 1.5mm GT-DH0005 - Countersink Blade 12mm GT-C12 - One each blade: GT-B10, GT-B20, GT-E100, GT-E200, GT-E300

Long Center Drill (Form A)

Center Drill with Flat (Form A)

Long type Center Drills Form A 60 degree longest at 200mm.

NC Drill 120°

120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898

Sold out

Flat Shank 3F Countersinks (90°)

3 Sides Flat Shank 3F Countersinks (90°) DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals.

Grattec Hand Scrapers

Scraper kit and scraper blade for sharp scraping and mold surface scraping Kit with yellow Grattec handle and replaceable blade

Expanding Reamers

Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003

Step Drill 90°

Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.

Grattec Hand Countersinks

Counter Sync Bit Removal Kit Manual Hole Deburring Handle Grattec Yellow Handle The counter sync head can be changed to other sizes.

Swivel Blades with Safety Cap

Plastic Safety Cap prevent the blade from scratching work. Ideal for deburring easy to scratch materials such as aluminum, plastic, other decorative work pieces.

Specialty Tools and Blades (L)

Grattec Specialty Deburring Blades L

Specialty Tools and Blades (L) for removing burrs on side of sheet metals, making chamfer, relieve narrow slots.

Piloted Countersinks (90°)

90degree Magafor Piloted Countersinks for boring tapered screw cap holes.

NF-E66023 / DIN 1866 / ISO

Ball Micro End Mills

Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.

Short and Extra Short model.

Grattec 7UP Kit

ชุดรวบรวมสุดยอดสินค้ายอดนิยมของ Grattec 7 ชิ้นด้วยกัน ในราคาสุดพิเศษ พร้อมกับกล่องสวยงาม เหมาะสำหรับเป็นเครื่องมือชุด Master สำหรับงานขูดลบคมต่างๆ ในชุดประกอบด้วย - GT-Countersink EL1300GT - GT-Medium Triangular scraper EL1600GT - GT "B" Set EL1100GT - Rapid Burr RB1000GT - GT-Keyway Burr EL1400GT - "E" set EL1200GT - GT- Internal Scraper EL1501GT

Aluminum Handle Scraper

Adjustable Scraper trimming and deburring hand tool SC8000GT. Black anodized hex 12mm aluminum handle come with T80 blade.

Center Drill (Form A) Old JIS

Long Center Drill (Form A)

Center Drill Old Japanese JIS standard 60 degree available in HSSE.

Carbide NC Drill 90°

Carbide NC Drill (90°) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.

Long 3F Countersinks (90°)

Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.

Specialty Tools and Blades (L)

ชุดลบคมเฉพาะทาง และใบมีดทางยาว (L) สำหรับลบคมสองด้าน, แต่งขอบงาน, ล้างขอบล่าง 08EL1703GT : ลบขอบแผ่นโลหะทั้งสองด้านไปพร้อมกันใช้ได้กับความหนา 1-8มม. 08EL1700GT : ใช้ในการทำขอบมุม 45° และขูดผิวขอบแผ่นโลหะให้เรียบ 08EL1705GT : ใช้ในการขูดขอบล่างร่องกัดสล็อตตั้งแต่ 5มม.

Step Drills Long Type 90°

Drilling standardized tapered 90° capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.

Hand Taper Pin Reamers

High speed steel taper reamer Magafor 700 / 720. Hand Taper Pin Reamer for hand reaming of tapered holes. Available in sprial flutes and straight flutes. Reaming taper 2% or 1:50 or 1° 08´

DIN 9 / NFE 066011

Reversible Countersink

Countersink สำหรับลบคมปากรูทะลุ เหมาะสำหรับรูทะลุที่ เคาเตอร์ซิงค์ ทั่วไปเข้าไม่ได้ สามารถลบขอบรูได้ทั้งสองด้านในด้ามเดียว Large : 08RC2200GT, Range 10-22mm Medium : 08RC2000GT, Range 5.5-10mm Mini : 08RC1000GT, Range 3.5-5mm

Micro End Mills

Magafor Micro Precision End Mills super micro end mills as small as diameter 0.10mm.

Trouble Shooter Set

A perfect combination of tools for almost every deburring jobs. Deburring, finishing, countersinking, scraping all fits into one compact handle.

1 x Special Aluminum Handle
1 x Scraper Blade 08GT-D50
1 x Straight Edge Deburring 08GT-E150
1 x 1-16.5mm Countersink 08GT-BC1650
1 x 4-18mm External Countersink 08GT-EX2000
1 x Swivel Blade 08GT-E100S

Center Drill (Form A) Old JIS

Center Drill Old Japanese JIS standard 60 degree available in HSSE.
Material: HSS Cobalt

Carbide NC Drill 120°

120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 120 degree NC Spotting Drill hole will provide a stability for drill.

Sold out

3F Countersinks (30°)

Countersink 30Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals.

Linear Shafts

Ball Retainers

Bushings

Slide Plates

น็อตสกรู

Shims

Toggle Clamps

Air Fittings

Brass Fittings

Plastic Couplers

Ball Rollers

Ball Bearings

Shims

Linear Shafts

Slide Plates

Bushings

Ball Rollers

น็อตสกรู

Toggle Clamps

Ball Bearings

Air Fittings

Plastic Couplers

Machine Cooling System

Linear Scale System

Work Lamps

Clamps

Machine Equipments

Machine Vises

Grinding Vises

Work Holding

Lathe Centers

Sprays

Grinding Wheel Dressers

Grinding Wheels

Diamond Files

Polishing Stones

Abrasive Points

Abrasive Sheets

Carbide Burrs

Abrasive Compounds

Air Tools

Ultrasonic Lapping Machines

Center Drills

NC Drills

Reamers

Countersinks

Step Drills

Counterbores

End Mills

Bandsaw Blades

Taps

Swivel Blade Deburring Tools

Countersink Deburring Tools

Ceramic Blade Deburring Tools

Scraper Blade Deburring Tools

Specialty Deburring Tools

Deburring Tools Set

Standard Demagnetizer

Magnetic Bases

Lifting Magnets

Permanent Magnetic Chucks

Electromagnetic Chucks

Electro-Permanent Magnetic Chuck

Slide Core Units

Guides for Mold

Positioning

Mold Couplings

Cooling System

Mold Clamps

Mold Accessories

Mold Springs

Die Accessories

Mold Springs

Calipers

Micrometers

Bore Gages

Dial Gages

Gages

Flat Levels

Hardness Testers