EN 
TH 
Vertical Hold-Down Toggle Clamp
Vertical Hold-Down Toggle Clamp
Vertical Hold-Down Toggle Clamp with nylon tip to prevent tool damage. The tip can be removed if needed.
Z-Axial Height Setter
Z-Axial Height Setter
Z-Axial height setting device with preset height of 50mm and 100mm. Magnetic base type are essential for use on milling and lathe machines.
Drill Resharpening Machine
Drill Resharpening Machine
Drill Grinder, resharpener, machine is a simple to use machine that can help regrinding used drill, or to form a special drill. The motor can run continuously over 1 hour.
- Accuracy and easy to operate, no experience required.
- Can make special drill with this machine.
- High efficiency.
- Long life.
Bar-Type Demagnetizer
Bar-Type Demagnetizer
Bar type for demagnetizing stamping die or injection mold while they are open. It can easily insert inside the opening.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Air Grinders
Air Grinders
General purpose air grinder, light and high speed. Suitable for light grinding with 3mm shank mounted points.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
ElectroPermanent Magnetic Chuck (A)
ElectroPermanent Magnetic Chuck (A)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Magnetic Square Block
Magnetic Square Block
Permanent Magnetic Square Block with V grooves, magnetic on top and sides.
Suitable for precision work, useful for both plate and round workpiece.
Magnetic Base Work Lamp
Magnetic Base Work Lamp
Working Lamp with Magnetic Base for working station or small machine lightning.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
- Magnetic Base with on/off switch
- 60 W light bulb
- 220 V
Magnet Oil-Type Protractor
Magnet Oil-Type Protractor
Magnetic Oil Type Protractor
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Vertical Hold-Down Toggle Clamp (Solid Arm)
Vertical Hold-Down Toggle Clamp (Solid Arm)
Tapped hole on the end of solid arm for choosing your own hold down head.
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose ECE
ECE Metal Hose cooling system come completed
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
End Mill ReSharpening Machine
End Mill ReSharpening Machine
End Mill grinder, re-sharpener, machine is a simple to use machine that can help re-grinding used end mills.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Handle-Type Demagnetizer
Handle-Type Demagnetizer
Handle-Type Demagnetizer small light-weight demagnetizer. Suitable for big machines, steel plates, molds where the object is not easily lift.
Safety Feature : Automatic Temperature Protection
90% Duty Cycle: Operate 20min / Cooldown 20min
Heavy Duty Air Grinder
Heavy Duty Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Suitable for heavy usage such as die grinding. Hold 3mm shank mounted points. Come with Ø3.0mm collet
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Mold Clamp
Mold Clamp
Mold Clamp 11MC series for variable height clamping of mold and die base. Mold Clamp do not require additional support. For using with T-Slot table, use with T-Nut.
- Normal type come with threaded studs, for use with T-Nut or install into threaded holes.
- T-Bolt type (2nd table) follow with code A or B, come with T-Bolt ready for use with T-Slot tables.
ElectroPermanent Magnetic Chuck (B)
ElectroPermanent Magnetic Chuck (B)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Paired Magnetic V-Block Key-Type
Paired Magnetic V-Block Key-Type
Earth-Chain ECE-507 Paired Magnetic V-Block Key-Type, this type use hex key to turn magnetic force on/off. Prevent accidentally turning the magnetic power off, and can be use in smaller space. The key is provided with the set, V-Block come in a pair.
Vertical Hold-Down Toggle Clamp (Straight Base)
Vertical Hold-Down Toggle Clamp (Straight Base)
Straight base hold down toggle clamp.
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine is a simple to use machine that can help re-using dull end mills and drill by cutting off the head to expose sharper edge.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Cutting Tool Demagnetizer
Cutting Tool Demagnetizer
Demagnetize cutting tools without removing it from machine. Help removing chips from tools.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Dual-Collet Air Grinder
Dual-Collet Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Can hold both 3mm and 6mm shanks by changing its collets which come with the tool.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Forged Goose Neck Clamp
Forged Goose Neck Clamp
Forged Goose Neck shaped clamp. Made with forged steel for heavy duty works.
Forged Mold Clamp
Forged Mold Clamp
Forged Mold Clamp 11MCF serie for variable height clamping of mold and die base. The clamp body is forged for extra strength. Mold Clamp do not require additional support.
- Normal type come with threaded studs, for use with T-Nut or install into threaded holes.
- T-Bolt type (2nd table) follow with code A or B, come with T-Bolt ready for use with T-Slot tables.
ElectroPermanent Magnetic Chuck (D)
ElectroPermanent Magnetic Chuck (D)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Paired Magnetic V-Block
Paired Magnetic V-Block
Earth-Chain ECE-510 paired permanent magnetic V-block, useful in holding of long workpiece for measuring or grinding. Sold in pair (2pcs/set).
Electromagnetic Chuck Controller
Electromagnetic Chuck Controller
Vertical Hold-Down Toggle Clamp (T-Handle)
Vertical Hold-Down Toggle Clamp (T-Handle)
Hold down toggle clamp with t handle
Surface Air Grinder 45°
Surface Air Grinder 45°
Surface grinder with 45 degree angle head. Suitable for surface or corner grinding. The box come with a cup wheel and paper discs. For heavy duty usage. Recommend for surface grinding, chamfering, deburring, and welded surfaces.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Standard Demagnetizer
Standard Demagnetizer
Table top type Standard Demagnetizer for industrial use, suitable for demagnetizing general components or spare parts.
For workpiece width under 110 mm.
100% Duty Cycle: Operate 24 hours
Tapped End Mold Clamp
Tapped End Mold Clamp
Tapped End Mold Clamp 11TTUC for clamping mold and die base, the clamping height is adjustable. Set included the clamp and threaded support.
ElectroPermanent Magnetic Chuck (E)
ElectroPermanent Magnetic Chuck (E)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Magnetic V-Block
Magnetic V-Block
Earth-Chain permanent magnetic v-block for holding of round, rod or small workpiece. High magnetic holding force type, can be turned on/off.
Hold-Down Toggle Clamp (Right Angle Base)
Hold-Down Toggle Clamp (Right Angle Base)
Vertical hold-down toggle clamp with right angle base.
Permanent Magnetic Clamping Block
Permanent Magnetic Clamping Block
Permanent magnet for machining large and medium work pieces. These are not suitable for small pieces.
Please choose from Holding Power and Minimum Thickness Required. The size of work piece must be larger than the area of 2 blocks.
Please choose from Holding Power and Minimum Thickness Required. The size of work piece must be larger than the area of 2 blocks.
Stepped Strap Clamp
Stepped Strap Clamp
Stepped Strap Clamp 11TSSC serie for work holding on machines and molds.
Surface Air Grinder 90°
Surface Air Grinder 90°
Surface grinder with 90 degree angle head. Suitable for surface or corner grinding. The box come with a cup wheel and paper discs. For heavy duty usage. Recommend for surface grinding, chamfering, deburring, and welded surfaces.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Powerful Demagnetizer
Powerful Demagnetizer
Powerful Demagnetizer for heavy industrial use, can be mounted on to surface or under conveyor belt. Suitable for demagnetizing on components or spare parts, or fixed under conveyor belt for automation demagnetization.
Powerful model for workpiece width not over 160 mm
100% Duty Cycle: Operate 24 hours
Forged Tapped End Mold Clamp
Forged Tapped End Mold Clamp
Forged Tapped End Mold Clamp for clamping mold and die base, the clamping height is adjustable. Set included the clamp and threaded support.
Electro-Permanent Magnetic Chuck T-Slot
Electro-Permanent Magnetic Chuck T-Slot
Electro-Permanent Magnetic Chuck with T-Slot Earth-Chain EEPM type for milling large workpieces.
Magnetic Holder with Handle
Magnetic Holder with Handle
The magnet is permanent magnet in square, rectangle and circular shape. The holder can be removed.
Air Lapper
Air Lapper
For air filing surface or small slots. Medium stroke length 0.5mm use with machine files, or ceramic fiber and polishing stones.Come with Ø3.0mm, 3.2mm, adjustable holder
*Maintenance air system often to lengthen the lives of Air Tools.
**Diamond file or fiber stone shown in the picture for demonstration purpose only, not included in the Air Lapper package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Diamond file or fiber stone shown in the picture for demonstration purpose only, not included in the Air Lapper package.
Hold-Down Toggle Clamp (Drop Handle)
Hold-Down Toggle Clamp (Drop Handle)
Hold-down toggle clamp with drop handle.
Optional Induction Blocks
EEPM Induction Blocks
Use induction blocks to increase height of workpieces and prevent damage to magnetic chuck surfaces. Spring blocks make uneven workpieces easier to hold.
High Capacity Demagnetizer
High Capacity Demagnetizer
High Capacity Demagnetizer large demagnetizer machine with high capacity, and wide working surface area. Powerful demagnetizing power, can be use with hard and large parts. Can run continuously for 24 hours.
Large model for workpiece width not over 400 mm
100% Duty Cycle: Operate 24 hours
Magnetic Holder
Magnetic Holder
Permanent Magnetic Holder round shapes. The magnetic holder can be use in many application such as holding small work, use in jig-figure, and holding work during wire-cut process.
Heavy Duty Air Lapper
Heavy Duty Air Lapper
Durable and strong type for filing surface or small slots. Two models with 0.3mm and 0.7mm stroke length.
Come with Ø3.0mm,1.0mm, 3.2mm, adjustable holder
*Maintenance air system often to lengthen the lives of Air Tools.
**Diamond file or fiber stone shown in the picture for demonstration purpose only, not included in the Air Lapper package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Diamond file or fiber stone shown in the picture for demonstration purpose only, not included in the Air Lapper package.