EN 
TH 
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
Z-Axial Height Setter
Z-Axial Height Setter
Z-Axial height setting device with preset height of 50mm and 100mm. Magnetic base type are essential for use on milling and lathe machines.
Drill Resharpening Machine
Drill Resharpening Machine
Drill Grinder, resharpener, machine is a simple to use machine that can help regrinding used drill, or to form a special drill. The motor can run continuously over 1 hour.
- Accuracy and easy to operate, no experience required.
- Can make special drill with this machine.
- High efficiency.
- Long life.
Bar-Type Demagnetizer
Bar-Type Demagnetizer
Bar type for demagnetizing stamping die or injection mold while they are open. It can easily insert inside the opening.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Air Grinders
Air Grinders
General purpose air grinder, light and high speed. Suitable for light grinding with 3mm shank mounted points.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
ElectroPermanent Magnetic Chuck (A)
ElectroPermanent Magnetic Chuck (A)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Magnetic Square Block
Magnetic Square Block
Permanent Magnetic Square Block with V grooves, magnetic on top and sides.
Suitable for precision work, useful for both plate and round workpiece.
Magnetic Base Work Lamp
Magnetic Base Work Lamp
Working Lamp with Magnetic Base for working station or small machine lightning.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
- Magnetic Base with on/off switch
- 60 W light bulb
- 220 V
Magnet Oil-Type Protractor
Magnet Oil-Type Protractor
Magnetic Oil Type Protractor
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose ECE
ECE Metal Hose cooling system come completed
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
End Mill ReSharpening Machine
End Mill ReSharpening Machine
End Mill grinder, re-sharpener, machine is a simple to use machine that can help re-grinding used end mills.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Handle-Type Demagnetizer
Handle-Type Demagnetizer
Handle-Type Demagnetizer small light-weight demagnetizer. Suitable for big machines, steel plates, molds where the object is not easily lift.
Safety Feature : Automatic Temperature Protection
90% Duty Cycle: Operate 20min / Cooldown 20min
Heavy Duty Air Grinder
Heavy Duty Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Suitable for heavy usage such as die grinding. Hold 3mm shank mounted points. Come with Ø3.0mm collet
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
ElectroPermanent Magnetic Chuck (B)
ElectroPermanent Magnetic Chuck (B)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Paired Magnetic V-Block Key-Type
Paired Magnetic V-Block Key-Type
Earth-Chain ECE-507 Paired Magnetic V-Block Key-Type, this type use hex key to turn magnetic force on/off. Prevent accidentally turning the magnetic power off, and can be use in smaller space. The key is provided with the set, V-Block come in a pair.
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine is a simple to use machine that can help re-using dull end mills and drill by cutting off the head to expose sharper edge.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Cutting Tool Demagnetizer
Cutting Tool Demagnetizer
Demagnetize cutting tools without removing it from machine. Help removing chips from tools.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Dual-Collet Air Grinder
Dual-Collet Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Can hold both 3mm and 6mm shanks by changing its collets which come with the tool.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
ElectroPermanent Magnetic Chuck (D)
ElectroPermanent Magnetic Chuck (D)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Paired Magnetic V-Block
Paired Magnetic V-Block
Earth-Chain ECE-510 paired permanent magnetic V-block, useful in holding of long workpiece for measuring or grinding. Sold in pair (2pcs/set).
Piloted Countersinks (90°)
Piloted Countersinks (90°)
90degree Magafor Piloted Countersinks for boring tapered screw cap holes.
NF-E66023 / DIN 1866 / ISO
Ball Micro End Mills
Ball Micro End Mills
Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.
Short and Extra Short model.
Center Drill (Form A) Old JIS
Long Center Drill (Form A)
Center Drill Old Japanese JIS standard 60 degree available in HSSE.
Carbide NC Drill 90°
Carbide NC Drill 90°
Carbide NC Drill (90°) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
Long 3F Countersinks (90°)
Long 3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Electromagnetic Chuck Controller
Electromagnetic Chuck Controller
Step Drills Long Type 90°
Step Drills Long Type 90°
Drilling standardized tapered 90° capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Surface Air Grinder 45°
Surface Air Grinder 45°
Surface grinder with 45 degree angle head. Suitable for surface or corner grinding. The box come with a cup wheel and paper discs. For heavy duty usage. Recommend for surface grinding, chamfering, deburring, and welded surfaces.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Standard Demagnetizer
Standard Demagnetizer
Table top type Standard Demagnetizer for industrial use, suitable for demagnetizing general components or spare parts.
For workpiece width under 110 mm.
100% Duty Cycle: Operate 24 hours
Hand Taper Pin Reamers
Hand Taper Pin Reamers
High speed steel taper reamer Magafor 700 / 720. Hand Taper Pin Reamer for hand reaming of tapered holes. Available in sprial flutes and straight flutes. Reaming taper 2% or 1:50 or 1° 08´
DIN 9 / NFE 066011
DIN 9 / NFE 066011
ElectroPermanent Magnetic Chuck (E)
ElectroPermanent Magnetic Chuck (E)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Magnetic V-Block
Magnetic V-Block
Earth-Chain permanent magnetic v-block for holding of round, rod or small workpiece. High magnetic holding force type, can be turned on/off.
Micro End Mills
Micro End Mills
Magafor Micro Precision End Mills super micro end mills as small as diameter 0.10mm.
Center Drill (Form A) Old JIS
Center Drill (Form A) Old JIS