EN 
TH 
Hand Countersink and Blade (C)
Grattec Countersink Bits C
Countersink blade (C size) and handle for hole deburring by hand. Grattec yellow handle with interchangeable countersink tool bits.
Handles and Holders
Handles and Holders
Replacement handles for blades. Choose suitable handle for Grattec and Noga swivel blades (E / B / or others types)
Z-Axial Height Setter
Z-Axial Height Setter
Z-Axial height setting device with preset height of 50mm and 100mm. Magnetic base type are essential for use on milling and lathe machines.
Drill Resharpening Machine
Drill Resharpening Machine
Drill Grinder, resharpener, machine is a simple to use machine that can help regrinding used drill, or to form a special drill. The motor can run continuously over 1 hour.
- Accuracy and easy to operate, no experience required.
- Can make special drill with this machine.
- High efficiency.
- Long life.
Bar-Type Demagnetizer
Bar-Type Demagnetizer
Bar type for demagnetizing stamping die or injection mold while they are open. It can easily insert inside the opening.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Air Grinders
Air Grinders
General purpose air grinder, light and high speed. Suitable for light grinding with 3mm shank mounted points.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
ElectroPermanent Magnetic Chuck (A)
ElectroPermanent Magnetic Chuck (A)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Magnetic Square Block
Magnetic Square Block
Permanent Magnetic Square Block with V grooves, magnetic on top and sides.
Suitable for precision work, useful for both plate and round workpiece.
Magnetic Base Work Lamp
Magnetic Base Work Lamp
Working Lamp with Magnetic Base for working station or small machine lightning.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
- Magnetic Base with on/off switch
- 60 W light bulb
- 220 V
Grattec Round Blades N
Grattec Round Blades N
Round replacement blades are used with metal edge deburring devices and longitudinal key grooves such as stainless steel sheets, metal plates. Compatible with Grattec and Noga handles
Swivel Blades Heavy Duty (E)
Swivel Blades Heavy Duty (E)
ใบมีดงอ ใบมีดลูบคม ลบครีบ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 3.2มม (ขนาด E)
สามารถใช้ได้กับด้ามจับขนาด 3.2มม ทั้ง Grattec และ Noga
Grattec Scraper Blades T
Grattec Scraper Blades T
Scraper with handle and scraper blades (T) for shaft and surface scraping. Set with Grattec yellow handle come with interchangeable scraper tool bit.
Ceramic Blade
Grattec Ceramic Blade
Ceramic Blade for flashing and deburring soft materials such as plastic, aluminum. Ceramic blades provide safer deburring for workers, and do not damage soft workpieces as much as sharp steel blade.
Magnet Oil-Type Protractor
Magnet Oil-Type Protractor
Magnetic Oil Type Protractor
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
mini Set
mini Set
ชุดสำหรับการตกแต่งชิ้นงานขนาดเล็ก เหมาะสำหรับงานที่ต้องการความ ละเอียดอ่อนสูง ทุกชิ้นมีด้ามจับขนาดเล็กเหมาะมือ
1 x Scraper Blade 08GT-D50
1 x Straight Edge Deburring 08GT-E150
1 x 0-3mm Countersink 08GT-BC3200
Hand Countersink and Swivel Blade (E)
Grattec Countersink Bits E
Swivel and Rotating countersink and external countersink blade (E size except 08EL3500GT) with handle for hole and rods end deburring by hand. Grattec yellow handle with interchangeable countersink tool bit.
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose ECE
ECE Metal Hose cooling system come completed
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
Double Edge Tool and Blades (K)
Grattec Double Edge Deburring Tools
Simultaneously removes burrs from both sides of sheet metal or keyways. The handle come with hand guard to prevent injury during use. Sheet thickness range 0-12mm.
Grattec Ceramic Deburring Tools
Grattec Ceramic Deburring Tools
A set of ceramic knives and ceramic blades for decoration, scraping or deburring soft materials such as plastic, aluminum.
End Mill ReSharpening Machine
End Mill ReSharpening Machine
End Mill grinder, re-sharpener, machine is a simple to use machine that can help re-grinding used end mills.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Handle-Type Demagnetizer
Handle-Type Demagnetizer
Handle-Type Demagnetizer small light-weight demagnetizer. Suitable for big machines, steel plates, molds where the object is not easily lift.
Safety Feature : Automatic Temperature Protection
90% Duty Cycle: Operate 20min / Cooldown 20min
Heavy Duty Air Grinder
Heavy Duty Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Suitable for heavy usage such as die grinding. Hold 3mm shank mounted points. Come with Ø3.0mm collet
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
ElectroPermanent Magnetic Chuck (B)
ElectroPermanent Magnetic Chuck (B)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Paired Magnetic V-Block Key-Type
Paired Magnetic V-Block Key-Type
Earth-Chain ECE-507 Paired Magnetic V-Block Key-Type, this type use hex key to turn magnetic force on/off. Prevent accidentally turning the magnetic power off, and can be use in smaller space. The key is provided with the set, V-Block come in a pair.
Swivel Blades Light Duty (B)
Swivel Blades Light Duty (B)
ใบมีดงอ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 2.6มม (ขนาด B)
สามารถใช้ได้กับด้ามจับขนาด 2.6มม ทั้ง Grattec และ Noga
Grattec Scraper Blades D
Grattec Scraper Blades D
Scraper blade for sharp scraping and mold surface scraping, used with Grattec and Noga metal surface scraping handle, size D
Grattec Box
Grattec Box
ชุดเครื่องมือ Grattec รวบรวมใบมีดชนิดต่างๆไว้ด้วยกันในราคาประหยัด พร้อมกล่องใส่สวยงาม
ในกล่องบรรจุ
- Double Burr DB2000GT
- Universal Handle EL1000GT
- Blade Holder EL0103GT
- Blade Holder EL0200GT
- Blade Holder EL0300GT+GT-C20
- Blade Holder EL0400GT+GT-N80K
- Blade Holder EL0500GT+GT-D50
- Blade Holder EL0500GT+GT-D66
- Hex Key 1.5mm GT-DH0005
- Countersink Blade 12mm GT-C12
- One each blade: GT-B10, GT-B20, GT-E100, GT-E200, GT-E300
Grattec Hand Scrapers
Grattec Hand Scrapers
Scraper kit and scraper blade for sharp scraping and mold surface scraping Kit with yellow Grattec handle and replaceable blade
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine is a simple to use machine that can help re-using dull end mills and drill by cutting off the head to expose sharper edge.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Cutting Tool Demagnetizer
Cutting Tool Demagnetizer
Demagnetize cutting tools without removing it from machine. Help removing chips from tools.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Dual-Collet Air Grinder
Dual-Collet Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Can hold both 3mm and 6mm shanks by changing its collets which come with the tool.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Grattec Hand Countersinks
Grattec Hand Countersinks
Counter Sync Bit Removal Kit Manual Hole Deburring Handle Grattec Yellow Handle The counter sync head can be changed to other sizes.
ElectroPermanent Magnetic Chuck (D)
ElectroPermanent Magnetic Chuck (D)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Paired Magnetic V-Block
Paired Magnetic V-Block
Earth-Chain ECE-510 paired permanent magnetic V-block, useful in holding of long workpiece for measuring or grinding. Sold in pair (2pcs/set).
Swivel Blades with Safety Cap
Swivel Blades with Safety Cap
Plastic Safety Cap prevent the blade from scratching work. Ideal for deburring easy to scratch materials such as aluminum, plastic, other decorative work pieces.
Specialty Tools and Blades (L)
Grattec Specialty Deburring Blades L
Specialty Tools and Blades (L) for removing burrs on side of sheet metals, making chamfer, relieve narrow slots.
Grattec 7UP Kit
Grattec 7UP Kit
ชุดรวบรวมสุดยอดสินค้ายอดนิยมของ Grattec 7 ชิ้นด้วยกัน ในราคาสุดพิเศษ พร้อมกับกล่องสวยงาม เหมาะสำหรับเป็นเครื่องมือชุด Master สำหรับงานขูดลบคมต่างๆ
ในชุดประกอบด้วย
- GT-Countersink EL1300GT
- GT-Medium Triangular scraper EL1600GT
- GT "B" Set EL1100GT
- Rapid Burr RB1000GT
- GT-Keyway Burr EL1400GT
- "E" set EL1200GT
- GT- Internal Scraper EL1501GT
Aluminum Handle Scraper
Aluminum Handle Scraper
Adjustable Scraper trimming and deburring hand tool SC8000GT.
Black anodized hex 12mm aluminum handle come with T80 blade.
Electromagnetic Chuck Controller
Electromagnetic Chuck Controller
Specialty Tools and Blades (L)
Specialty Tools and Blades (L)
ชุดลบคมเฉพาะทาง และใบมีดทางยาว (L) สำหรับลบคมสองด้าน, แต่งขอบงาน, ล้างขอบล่าง
08EL1703GT : ลบขอบแผ่นโลหะทั้งสองด้านไปพร้อมกันใช้ได้กับความหนา 1-8มม.
08EL1700GT : ใช้ในการทำขอบมุม 45° และขูดผิวขอบแผ่นโลหะให้เรียบ
08EL1705GT : ใช้ในการขูดขอบล่างร่องกัดสล็อตตั้งแต่ 5มม.
Surface Air Grinder 45°
Surface Air Grinder 45°
Surface grinder with 45 degree angle head. Suitable for surface or corner grinding. The box come with a cup wheel and paper discs. For heavy duty usage. Recommend for surface grinding, chamfering, deburring, and welded surfaces.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Standard Demagnetizer
Standard Demagnetizer
Table top type Standard Demagnetizer for industrial use, suitable for demagnetizing general components or spare parts.
For workpiece width under 110 mm.
100% Duty Cycle: Operate 24 hours
ElectroPermanent Magnetic Chuck (E)
ElectroPermanent Magnetic Chuck (E)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Magnetic V-Block
Magnetic V-Block
Earth-Chain permanent magnetic v-block for holding of round, rod or small workpiece. High magnetic holding force type, can be turned on/off.
Reversible Countersink
Reversible Countersink
Countersink สำหรับลบคมปากรูทะลุ เหมาะสำหรับรูทะลุที่ เคาเตอร์ซิงค์ ทั่วไปเข้าไม่ได้ สามารถลบขอบรูได้ทั้งสองด้านในด้ามเดียว
Large : 08RC2200GT, Range 10-22mm
Medium : 08RC2000GT, Range 5.5-10mm
Mini : 08RC1000GT, Range 3.5-5mm
Trouble Shooter Set
Trouble Shooter Set
A perfect combination of tools for almost every deburring jobs. Deburring, finishing, countersinking, scraping all fits into one compact handle.
1 x Special Aluminum Handle
1 x Scraper Blade 08GT-D50
1 x Straight Edge Deburring 08GT-E150
1 x 1-16.5mm Countersink 08GT-BC1650
1 x 4-18mm External Countersink 08GT-EX2000
1 x Swivel Blade 08GT-E100S
1 x Special Aluminum Handle
1 x Scraper Blade 08GT-D50
1 x Straight Edge Deburring 08GT-E150
1 x 1-16.5mm Countersink 08GT-BC1650
1 x 4-18mm External Countersink 08GT-EX2000
1 x Swivel Blade 08GT-E100S
Permanent Magnetic Clamping Block
Permanent Magnetic Clamping Block
Permanent magnet for machining large and medium work pieces. These are not suitable for small pieces.
Please choose from Holding Power and Minimum Thickness Required. The size of work piece must be larger than the area of 2 blocks.
Please choose from Holding Power and Minimum Thickness Required. The size of work piece must be larger than the area of 2 blocks.
Surface Air Grinder 90°
Surface Air Grinder 90°
Surface grinder with 90 degree angle head. Suitable for surface or corner grinding. The box come with a cup wheel and paper discs. For heavy duty usage. Recommend for surface grinding, chamfering, deburring, and welded surfaces.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Tube Reamer
Tube Reamer
ลบขอบ ID และ OD ด้วยอุปกรณ์ชิ้นเดียว ใบมีดข้างในทำจาก HSS ที่จับทำจากพลาสติก กระชับไม่ลื่นมือ ใช้ได้กับท่อ อลูมินัม, ทองเหลือง, ทองแดง, พลาสติก, สเตนเลสสตีล
ระยะการลบคม: 4-42mm
Powerful Demagnetizer
Powerful Demagnetizer
Powerful Demagnetizer for heavy industrial use, can be mounted on to surface or under conveyor belt. Suitable for demagnetizing on components or spare parts, or fixed under conveyor belt for automation demagnetization.
Powerful model for workpiece width not over 160 mm
100% Duty Cycle: Operate 24 hours