EN 
TH 
Pin Gage Box
Metric Pin Gage Box
Vermont Gage's Box Set most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 0.02mm set increments
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Hand Countersink and Blade (C)
Grattec Countersink Bits C
Countersink blade (C size) and handle for hole deburring by hand. Grattec yellow handle with interchangeable countersink tool bits.
Handles and Holders
Handles and Holders
Replacement handles for blades. Choose suitable handle for Grattec and Noga swivel blades (E / B / or others types)
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose
JETON magnetic base coolant hose available in single hoses, two hoses, three hoses.
*The hose can be customized with adjustable coolant hose packs, purchase separately
*The hose can be customized with adjustable coolant hose packs, purchase separately
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
Z-Axial Height Setter
Z-Axial Height Setter
Z-Axial height setting device with preset height of 50mm and 100mm. Magnetic base type are essential for use on milling and lathe machines.
Drill Resharpening Machine
Drill Resharpening Machine
Drill Grinder, resharpener, machine is a simple to use machine that can help regrinding used drill, or to form a special drill. The motor can run continuously over 1 hour.
- Accuracy and easy to operate, no experience required.
- Can make special drill with this machine.
- High efficiency.
- Long life.
Bar-Type Demagnetizer
Bar-Type Demagnetizer
Bar type for demagnetizing stamping die or injection mold while they are open. It can easily insert inside the opening.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Air Grinders
Air Grinders
General purpose air grinder, light and high speed. Suitable for light grinding with 3mm shank mounted points.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
ElectroPermanent Magnetic Chuck (A)
ElectroPermanent Magnetic Chuck (A)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Magnetic Square Block
Magnetic Square Block
Permanent Magnetic Square Block with V grooves, magnetic on top and sides.
Suitable for precision work, useful for both plate and round workpiece.
Magnetic Base Work Lamp
Magnetic Base Work Lamp
Working Lamp with Magnetic Base for working station or small machine lightning.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
- Magnetic Base with on/off switch
- 60 W light bulb
- 220 V
Grattec Round Blades N
Grattec Round Blades N
Round replacement blades are used with metal edge deburring devices and longitudinal key grooves such as stainless steel sheets, metal plates. Compatible with Grattec and Noga handles
Swivel Blades Heavy Duty (E)
Swivel Blades Heavy Duty (E)
ใบมีดงอ ใบมีดลูบคม ลบครีบ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 3.2มม (ขนาด E)
สามารถใช้ได้กับด้ามจับขนาด 3.2มม ทั้ง Grattec และ Noga
Grattec Scraper Blades T
Grattec Scraper Blades T
Scraper with handle and scraper blades (T) for shaft and surface scraping. Set with Grattec yellow handle come with interchangeable scraper tool bit.
Ceramic Blade
Grattec Ceramic Blade
Ceramic Blade for flashing and deburring soft materials such as plastic, aluminum. Ceramic blades provide safer deburring for workers, and do not damage soft workpieces as much as sharp steel blade.
Magnet Oil-Type Protractor
Magnet Oil-Type Protractor
Magnetic Oil Type Protractor
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
mini Set
mini Set
ชุดสำหรับการตกแต่งชิ้นงานขนาดเล็ก เหมาะสำหรับงานที่ต้องการความ ละเอียดอ่อนสูง ทุกชิ้นมีด้ามจับขนาดเล็กเหมาะมือ
1 x Scraper Blade 08GT-D50
1 x Straight Edge Deburring 08GT-E150
1 x 0-3mm Countersink 08GT-BC3200
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
Hand Countersink and Swivel Blade (E)
Grattec Countersink Bits E
Swivel and Rotating countersink and external countersink blade (E size except 08EL3500GT) with handle for hole and rods end deburring by hand. Grattec yellow handle with interchangeable countersink tool bit.
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose ECE
ECE Metal Hose cooling system come completed
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
Individual Pin Gage
Metric Individual Pin Gage
Vermont Gage's Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
*Please specify pin gage sizes you need with ordering
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
*Please specify pin gage sizes you need with ordering
Double Edge Tool and Blades (K)
Grattec Double Edge Deburring Tools
Simultaneously removes burrs from both sides of sheet metal or keyways. The handle come with hand guard to prevent injury during use. Sheet thickness range 0-12mm.
Grattec Ceramic Deburring Tools
Grattec Ceramic Deburring Tools
A set of ceramic knives and ceramic blades for decoration, scraping or deburring soft materials such as plastic, aluminum.
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
End Mill ReSharpening Machine
End Mill ReSharpening Machine
End Mill grinder, re-sharpener, machine is a simple to use machine that can help re-grinding used end mills.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Handle-Type Demagnetizer
Handle-Type Demagnetizer
Handle-Type Demagnetizer small light-weight demagnetizer. Suitable for big machines, steel plates, molds where the object is not easily lift.
Safety Feature : Automatic Temperature Protection
90% Duty Cycle: Operate 20min / Cooldown 20min
Heavy Duty Air Grinder
Heavy Duty Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Suitable for heavy usage such as die grinding. Hold 3mm shank mounted points. Come with Ø3.0mm collet
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
ElectroPermanent Magnetic Chuck (B)
ElectroPermanent Magnetic Chuck (B)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Paired Magnetic V-Block Key-Type
Paired Magnetic V-Block Key-Type
Earth-Chain ECE-507 Paired Magnetic V-Block Key-Type, this type use hex key to turn magnetic force on/off. Prevent accidentally turning the magnetic power off, and can be use in smaller space. The key is provided with the set, V-Block come in a pair.
Swivel Blades Light Duty (B)
Swivel Blades Light Duty (B)
ใบมีดงอ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 2.6มม (ขนาด B)
สามารถใช้ได้กับด้ามจับขนาด 2.6มม ทั้ง Grattec และ Noga
Grattec Scraper Blades D
Grattec Scraper Blades D
Scraper blade for sharp scraping and mold surface scraping, used with Grattec and Noga metal surface scraping handle, size D
Pin Gage Box (Inch)
Inch Pin Gage Box
Vermont Gage's inch size Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Inch
- Class ZZ
- Material: Tool Steel
- 0.001'' set increments
- 2'' long
- Marked with size (0.0605'' or bigger)
- NIST traceable
Grattec Box
Grattec Box
ชุดเครื่องมือ Grattec Box รวบรวมใบมีดชนิดต่างๆไว้ด้วยกันในราคาประหยัด พร้อมกล่องใส่สวยงาม พกพาจัดเก็บสะดวก
Includes:
- Double Burr DB2000GT
- Universal Handle EL1000GT
- Blade Holder EL0103GT
- Blade Holder EL0200GT
- Blade Holder EL0300GT+GT-C20
- Blade Holder EL0400GT+GT-N80K
- Blade Holder EL0500GT+GT-D50
- Blade Holder EL0500GT+GT-D66
- Hex Key 1.5mm GT-DH0005
- Countersink Blade 12mm GT-C12
- One each blade: GT-B10, GT-B20, GT-E100, GT-E200, GT-E300
Includes:
- Double Burr DB2000GT
- Universal Handle EL1000GT
- Blade Holder EL0103GT
- Blade Holder EL0200GT
- Blade Holder EL0300GT+GT-C20
- Blade Holder EL0400GT+GT-N80K
- Blade Holder EL0500GT+GT-D50
- Blade Holder EL0500GT+GT-D66
- Hex Key 1.5mm GT-DH0005
- Countersink Blade 12mm GT-C12
- One each blade: GT-B10, GT-B20, GT-E100, GT-E200, GT-E300
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
Grattec Hand Scrapers
Grattec Hand Scrapers
Scraper kit and scraper blade for sharp scraping and mold surface scraping Kit with yellow Grattec handle and replaceable blade
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine is a simple to use machine that can help re-using dull end mills and drill by cutting off the head to expose sharper edge.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.