EN 
TH 
M&W Digital Test Indicator
M&W Digital Test Indicator
Moore & Wright MW420 Digital Test Indicator with on/off, set zero, and metric / inch conversion.
M&W Bore Gage
M&W Bore Gage
Boride Diamond Compounds
Boride Diamond Compounds
Mold Makers Diamond has a wide thermal processing range allowing it to be used under the most demanding conditions. It is oil soluble with consistent diamond particles, and is used for precision finishing of all types of molds and dies. The unique syringes are dial controlled offering precise compound distribution.
Syringes are individually packaged in boxes for easy stocking on shelves.
Pin Gage Box
Metric Pin Gage Box
Vermont Gage's Box Set most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 0.02mm set increments
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
Light Green Spring (Ultra-High Deflection)
Light Green Spring (Ultra-High Deflection)
Boride AM-8 EDM Stone
Boride AM-8 EDM Stone
The AM-8 is designed for removing EDM scale on all types of mold and die steel. Can be use on polishing machines.
*Boride polishing stone can be sold individually or by box (look up pcs/box). Save more by purchasing in box quantity.
AS Ceramic Grinding Wheel
AS Ceramic Grinding Wheel
Blue grinding wheel 'AS'. Ceramic grain blended wheel with maximum grinding performance, precision, tool life, and excellent form and corner holding. Work best on hard steels.
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
M&W Dial Vernier Caliper
M&W Dial Vernier Caliper
Moore & Wright MW140 Dial caliper with clear red on black dial.
Mitutoyo Dial Depth Gage
Mitutoyo Dial Depth Gage
Mitutoyo Dial Bore Gages
Mitutoyo Dial Bore Gages
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
Individual Pin Gage
Metric Individual Pin Gage
Vermont Gage's Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
*Please specify pin gage sizes you need with ordering
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
*Please specify pin gage sizes you need with ordering
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
Light Blue Spring (Super-High Deflection)
Light Blue Spring (Super-High Deflection)
Boride AS-9 EDM Stone
Boride AS-9 EDM Stone
Boride AS-9 EDM Stone is engineered for hand stoning EDM scale surfaces. The special formulation provides a fast, smooth cutting action during hand stoning.
*Boride polishing stone can be sold individually or by box (look up pcs/box). Save more by purchasing in box quantity.
WA Grinding Wheel
WA Grinding Wheel
White grain grinding wheel WA. High friability grain suitable for general of steels and light grinding of hard steels.
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
M&W Outside Micrometer
M&W Outside Micrometer
Mitutoyo 500 ดิจิตอล เวอร์เนียแคลิปเปอร์
Mitutoyo 500 Digital Vernier Caliper
Mitutoyo ABSOLUTE ดิจิมาติกแคลิปเปอร์ series 500
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
Mitutoyo 513 ไดอัลเทสอินดิเคเตอร์
Mitutoyo 513 Dial Test Indicator
Mitutoyo ไดอัล เทสอินดิเคเตอร์ เข็มไดอัลรุ่น series: 513-40
รุ่น 0.01×0.8mm และ 0.002×0.2mm
รุ่น 0.01×0.8mm และ 0.002×0.2mm
Mitutoyo 530 เวอร์เนียแคลิปเปอร์
Mitutoyo 530 Vernier Caliper
Mitutoyo เวอร์เนียแคลิปเปอร์ series 530
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
Mitutoyo 543 ดิจิตอล ไดอัลเกจ
Mitutoyo 543 Digital Dial Gage
Mitutoyo ดิจิตอล อินดิเคเตอร์
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
Mitutoyo ไดอัลเกจ
Mitutoyo Dial Gage
Mitutoyo ไดอัลเกจ อ่านค่า 0.01มม และ 0.001มม
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
Pin Gage Box (Inch)
Inch Pin Gage Box
Vermont Gage's inch size Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Inch
- Class ZZ
- Material: Tool Steel
- 0.001'' set increments
- 2'' long
- Marked with size (0.0605'' or bigger)
- NIST traceable
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
Lock II Machine Vice
Lock II Machine Vice
ปากกาจับชิ้นงาน รุ่น Lock II Homge HMC ทุกด้านผ่านการเจียรราบ จึงเหมาะกับงานที่ต้องพลิกด้าน และสำหรับการนำไปวางเรียงกันหลายๆตัว เพื่อจับชิ้นงานที่ยาวและขนาดแต่ละส่วนไม่เท่ากัน หรือ นำไปจับงานหลายๆตัวเพื่อที่จะกัดพร้อมกันบนเครื่อง NC
- ทุกด้าน Accuracy 0.02mm.
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Ivory White Spring (High Deflection)
Ivory White Spring (High Deflection)
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Boride Orange-EDM
Boride Orange-EDM
The Orange-EDM is designed for excellent EDM scale removal.
*Boride polishing stone can be sold individually or by box (look up pcs/box). Save more by purchasing in box quantity.
WAR Grinding Wheel
WAR Grinding Wheel
WAR wheel is an Improvement over WA for tempered steels and HSS. Provide exceptional cool, fast cutting, and require minimum dressing.
Piloted Countersinks (90°)
Piloted Countersinks (90°)
90degree Magafor Piloted Countersinks for boring tapered screw cap holes.
NF-E66023 / DIN 1866 / ISO
Ball Micro End Mills
Ball Micro End Mills
Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.
Short and Extra Short model.
M&W Parallax Free Outside Micrometer
M&W Parallax Free Outside Micrometer
Outside Micrometer high precision with non-rotating spindle and parallax free reading Moore & Wright MW204
Mitutoyo 505 แคลิปเปอร์ รุ่นไดอัล
Mitutoyo 505 Dial Caliper
Mitutoyo Dial Vernier Caliper series 505
Center Drill (Form A) Old JIS
Long Center Drill (Form A)
Center Drill Old Japanese JIS standard 60 degree available in HSSE.
Carbide NC Drill 90°
Carbide NC Drill 90°
Carbide NC Drill (90°) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
Long 3F Countersinks (90°)
Long 3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.