EN 
TH 
Hardness Tester Files
Hardness Tester Files
Tsubosan Hardness Tester Files: a simple experimental tools for hardness between HRC40 ～ 65.
Very convenient pocket size hardness tester. Each file is color coded, and hardness is printed onto handle.
Using direction : pick the hardest file and scratch onto testing surface, if scratch line appear then use softer file until no scratch line appear. The hardness of the testing object then should be between the non-scratching file and the scratching file.
Very convenient pocket size hardness tester. Each file is color coded, and hardness is printed onto handle.
Using direction : pick the hardest file and scratch onto testing surface, if scratch line appear then use softer file until no scratch line appear. The hardness of the testing object then should be between the non-scratching file and the scratching file.
Pin Gage Box
Metric Pin Gage Box
Vermont Gage's Box Set most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 0.02mm set increments
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
NT Face Mill Holder
NT Face Mill Holder
NT shank Face Mill holder, can hold metric type face mills (FMB).
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose
JETON magnetic base coolant hose available in single hoses, two hoses, three hoses.
*The hose can be customized with adjustable coolant hose packs, purchase separately
*The hose can be customized with adjustable coolant hose packs, purchase separately
ER Collet
ER Collet
ER Spring Collet DIN6499 for holding endmill on milling machine.
Available individually or in set. Set of ER collet order code at the bottom of table
Types : ER08, ER11, ER16, ER20, ER25, ER32, ER40, ER50
Collet Sets : included all range of the collet series
Available individually or in set. Set of ER collet order code at the bottom of table
Types : ER08, ER11, ER16, ER20, ER25, ER32, ER40, ER50
Collet Sets : included all range of the collet series
Mitutoyo Dial Depth Gage
Mitutoyo Dial Depth Gage
Mitutoyo Dial Bore Gages
Mitutoyo Dial Bore Gages
Drill Tapper Set
Drill Tapper Set
Drill Tapper Set D24 and D33 for tapping and drilling in one set. The tapper holder torque can be adjust to HIGH or LOW depend on the material.
1 SET included.
- 1 Tapper Holder (MT Shank)
- 1 Drill Chuck + Adapter
- 2 MT Sleeves
- 6 Tap Collets
Extra collets, sleeve, tap holder, drill chuck can be sold individually.
1 SET included.
- 1 Tapper Holder (MT Shank)
- 1 Drill Chuck + Adapter
- 2 MT Sleeves
- 6 Tap Collets
Extra collets, sleeve, tap holder, drill chuck can be sold individually.
BT Face Mill Holder
BT Face Mill Holder
BT shank Face Mill holder, can hold metric type face mills (FMB).
Individual Pin Gage
Metric Individual Pin Gage
Vermont Gage's Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
*Please specify pin gage sizes you need with ordering
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
*Please specify pin gage sizes you need with ordering
Mitutoyo 500 ดิจิตอล เวอร์เนียแคลิปเปอร์
Mitutoyo 500 Digital Vernier Caliper
Mitutoyo ABSOLUTE ดิจิมาติกแคลิปเปอร์ series 500
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
Mitutoyo 513 ไดอัลเทสอินดิเคเตอร์
Mitutoyo 513 Dial Test Indicator
Mitutoyo ไดอัล เทสอินดิเคเตอร์ เข็มไดอัลรุ่น series: 513-40
รุ่น 0.01×0.8mm และ 0.002×0.2mm
รุ่น 0.01×0.8mm และ 0.002×0.2mm
Mitutoyo 530 เวอร์เนียแคลิปเปอร์
Mitutoyo 530 Vernier Caliper
Mitutoyo เวอร์เนียแคลิปเปอร์ series 530
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
Mitutoyo 543 ดิจิตอล ไดอัลเกจ
Mitutoyo 543 Digital Dial Gage
Mitutoyo ดิจิตอล อินดิเคเตอร์
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
Mitutoyo ไดอัลเกจ
Mitutoyo Dial Gage
Mitutoyo ไดอัลเกจ อ่านค่า 0.01มม และ 0.001มม
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
Pin Gage Box (Inch)
Inch Pin Gage Box
Vermont Gage's inch size Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Inch
- Class ZZ
- Material: Tool Steel
- 0.001'' set increments
- 2'' long
- Marked with size (0.0605'' or bigger)
- NIST traceable
BT Drill Chuck Holder
BT Drill Chuck Holder
BT Drill Chuck Holder for holding jacob taper (JT) drill chuck. Available for machine taper BT30 , BT40 , BT50.
Mitutoyo 505 แคลิปเปอร์ รุ่นไดอัล
Mitutoyo 505 Dial Caliper
Mitutoyo Dial Vernier Caliper series 505
NT Drill Chuck Holder
NT Drill Chuck Holder
NT Drill Chuck Holder for holding jacob taper (JT) drill chuck. Available for machine taper NT30 , NT40 , NT50.
Individual Pin Gage (Inch)
Inch Individual Pin Gage
Vermont Gage's inch size Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
*Please specify pin gage sizes you need with ordering
Vermont Gage products are supplied with Certificate of Accuracy.
- Inch
- Class ZZ
- Material: Tool Steel
- 2'' long
- Marked with size (0.0605'' or bigger)
- NIST traceable
*Please specify pin gage sizes you need with ordering
MT ER Collet Chuck
MT ER Collet Chuck
Milling chuck ER collet system with MTB Morse Taper shank.
Shell End Mill 90°
Shell End Mill 90°
Shell End Mill MS Series 90 degree hold triangle inserts. For face milling, and shoulder milling.
Flow Control Unit
Flow Control Unit
Flow Control Unit (Manifold) for machine tool water, and air flow management. Easy to install, and convenient to maintenance. The unit can control both air flow and liquid flow.
The hose can be easily change and modify with Jeton hose system.
The hose can be easily change and modify with Jeton hose system.
Tool Stand
Tool Stand
Tool Stand for endmill and drill tools diameter 6-42mm. with capacity of total 62 tools.
Plain Plug Gage
Plain Plug Gage
Vermont Gage Plug Gage for Go/NoGo/Master inspection.
With one end in green (Go), and another in red (NoGo), or Master plug gage.
Class XX, X, Y, Z, ZZ
- Select the size, millimeter, or inch when placing an order.
- NIST traceable
- Tool Steel; 60/65 Rc
- Comes with a quality inspection certificate from the manufacturer.
- สั่งซื้อใบเซอร์เพิ่มเติมได้ (Certificate of Accredited Calibration)
With one end in green (Go), and another in red (NoGo), or Master plug gage.
Class XX, X, Y, Z, ZZ
- Select the size, millimeter, or inch when placing an order.
- NIST traceable
- Tool Steel; 60/65 Rc
- Comes with a quality inspection certificate from the manufacturer.
- สั่งซื้อใบเซอร์เพิ่มเติมได้ (Certificate of Accredited Calibration)
Straight ER Collet Chuck
Straight ER Collet Chuck
ER Collet holder with straight shank for extending machining range. Shank length can be choosen from 100 and 150mm
BT Drill Chuck
BT Drill Chuck
APU Drill Chuck integrated with the BT shank for heavy duty and high speed drilling.
Spraying Device
Spraying Device
Spraying Device for spraying coolant oil mist JETON model 13JTF.
Choose from air and oil inlets sizes 4mm. / 8mm.
Product Order Code end with M come with magnetic base.
Model 13JTF-001 : Use both air and oil pressure
Atmospheric pressure: 0.5~5 kg/cm2
Hydraulic pressure: 0.5~2 kg/cm2
Model 13JTF-002 : Use only air pressure to bring oil out
Atmospheric pressure: 3.5~5 kg/cm2
Hydraulic pressure: 0
Choose from air and oil inlets sizes 4mm. / 8mm.
Product Order Code end with M come with magnetic base.
Model 13JTF-001 : Use both air and oil pressure
Atmospheric pressure: 0.5~5 kg/cm2
Hydraulic pressure: 0.5~2 kg/cm2
Model 13JTF-002 : Use only air pressure to bring oil out
Atmospheric pressure: 3.5~5 kg/cm2
Hydraulic pressure: 0
Plain Ring Gage
Plain Ring Gage
Plain Ring Gage for Go/NoGo part inspection, or use as master for bore gage. All Vermont Gage product come with certificated of accuracy.
- Class X, Y, Z
- Select the size, millimeter, or inch when placing an order.
- NIST traceable
- Tool Steel; 60/65 Rc
- Comes with a quality inspection certificate from the manufacturer.
- สั่งซื้อใบเซอร์เพิ่มเติมได้ (Certificate of Accredited Calibration)
- Class X, Y, Z
- Select the size, millimeter, or inch when placing an order.
- NIST traceable
- Tool Steel; 60/65 Rc
- Comes with a quality inspection certificate from the manufacturer.
- สั่งซื้อใบเซอร์เพิ่มเติมได้ (Certificate of Accredited Calibration)
BT Test Arbor
BT Test Arbor
BT Arbor test bar for testing run out of the machine BT tooling system.
Tilting Table
Tilting Table
Hand crank Tilting Table, this model is more precision than Tilting Angle Plate.
Metric Thread Gage
Metric Thread Gage
Metric type Thread Plug Gage and Thread Ring Gage for work inspection.
Certificate of Accuracy is included.
มาพร้อม Certificate of Accuracy และสามารถซื้อใบเซอร์ ISO 17025 Accredited Calibration Certificates เพิ่มเติม
มาพร้อม Certificate of Accuracy และสามารถซื้อใบเซอร์ ISO 17025 Accredited Calibration Certificates เพิ่มเติม
- Thread Types: M Series Metric
- Tolerance: Class X
- Plug Gage Class of Fit : 6H
- Plug Gage Material : Chrome 70/72 Rc
- NIST traceable
- Comes with a quality inspection certificate from the manufacturer.
- Certificate of Accredited Calibration
Hose Assembly Pliers
Hose Assembly Pliers
Jeton Hose Plier for constructing or removing adjustable hose.
1326171 for hose type 1/4''
1326176 for hose type 3/8''
1326172 for hose type 1/2''
1326177 for hose type 3/4''
1326171 for hose type 1/4''
1326176 for hose type 3/8''
1326172 for hose type 1/2''
1326177 for hose type 3/4''
Metric Thread Gage
Metric Thread Gage
Metric type Thread Plug Gage and Thread Ring Gage for work inspection.
Certificate of Accuracy is included.
มาพร้อม Certificate of Accuracy และสามารถซื้อใบเซอร์ ISO 17025 Accredited Calibration Certificates เพิ่มเติม
มาพร้อม Certificate of Accuracy และสามารถซื้อใบเซอร์ ISO 17025 Accredited Calibration Certificates เพิ่มเติม
- Thread Types: M Series Metric
- Tolerance: Class X
- Ring Gage Class of Fit : 6g
- Ring Gage Material : Tool Steel, 60/62 Rc
- NIST traceable
- Comes with a quality inspection certificate from the manufacturer.
- Certificate of Accredited Calibration
Power Table Feed
Power Table Feed
Power table feed for milling and drilling machine table. Select the code that match the machine axis you want to install (X / Y / Z)
Vertex Horizontal Vertical Rotary Table
Vertex Horizontal Vertical Rotary Table
Horizontal-Vertical Rotary Table can be use in horizontal or vertical position. One turn of handle will move the table 4 degree.
Coolant Hose With Valve
Coolant Hose With Valve
Pre-assembly Coolant hose set with male or female in PT or NPT thread valve.
Size available are 1/4" , 3/8", 1/2" ,and 3/4"
Size available are 1/4" , 3/8", 1/2" ,and 3/4"
Inch Thread Gage
Inch Thread Gage
Imperial type Thread Plug Gage and Thread Ring Gage for work inspection.
มาพร้อม Certificate of Accuracy และสามารถซื้อใบเซอร์ ISO 17025 Accredited Calibration Certificates เพิ่มเติม
มาพร้อม Certificate of Accuracy และสามารถซื้อใบเซอร์ ISO 17025 Accredited Calibration Certificates เพิ่มเติม
- Thread Types: Imperial (Inch)
- Tolerance: Class X
- Plug Gage Class of Fit : 2B and 3B
- Plug Gage Material : Chrome 70/72 Rc
- NIST traceable
- Comes with a quality inspection certificate from the manufacturer.
- Certificate of Accredited Calibration