EN 
TH 
OSG Deep Hole Tap
OSG General Purpose Tap
HSSE high speed steel OSG EX-SFT spiral flute tap for general tapping.
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Hand Countersink and Blade (C)
Grattec Countersink Bits C
Countersink blade (C size) and handle for hole deburring by hand. Grattec yellow handle with interchangeable countersink tool bits.
Handles and Holders
Handles and Holders
Replacement handles for blades. Choose suitable handle for Grattec and Noga swivel blades (E / B / or others types)
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Grattec Round Blades N
Grattec Round Blades N
Round replacement blades are used with metal edge deburring devices and longitudinal key grooves such as stainless steel sheets, metal plates. Compatible with Grattec and Noga handles
Swivel Blades Heavy Duty (E)
Swivel Blades Heavy Duty (E)
ใบมีดงอ ใบมีดลูบคม ลบครีบ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 3.2มม (ขนาด E)
สามารถใช้ได้กับด้ามจับขนาด 3.2มม ทั้ง Grattec และ Noga
Grattec Scraper Blades T
Grattec Scraper Blades T
Scraper with handle and scraper blades (T) for shaft and surface scraping. Set with Grattec yellow handle come with interchangeable scraper tool bit.
Ceramic Blade
Grattec Ceramic Blade
Ceramic Blade for flashing and deburring soft materials such as plastic, aluminum. Ceramic blades provide safer deburring for workers, and do not damage soft workpieces as much as sharp steel blade.
Mitutoyo Dial Depth Gage
Mitutoyo Dial Depth Gage
Mitutoyo Dial Bore Gages
Mitutoyo Dial Bore Gages
mini Set
mini Set
ชุดสำหรับการตกแต่งชิ้นงานขนาดเล็ก เหมาะสำหรับงานที่ต้องการความ ละเอียดอ่อนสูง ทุกชิ้นมีด้ามจับขนาดเล็กเหมาะมือ
1 x Scraper Blade 08GT-D50
1 x Straight Edge Deburring 08GT-E150
1 x 0-3mm Countersink 08GT-BC3200
OSG Deep Hole Tap
OSG Deep Hole Tap
OSG MS-DH SFT high speed steel HSSE tap with blackening, spiral flute for mild steels and deep holes.
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
Hand Countersink and Swivel Blade (E)
Grattec Countersink Bits E
Swivel and Rotating countersink and external countersink blade (E size except 08EL3500GT) with handle for hole and rods end deburring by hand. Grattec yellow handle with interchangeable countersink tool bit.
Double Edge Tool and Blades (K)
Grattec Double Edge Deburring Tools
Simultaneously removes burrs from both sides of sheet metal or keyways. The handle come with hand guard to prevent injury during use. Sheet thickness range 0-12mm.
Grattec Ceramic Deburring Tools
Grattec Ceramic Deburring Tools
A set of ceramic knives and ceramic blades for decoration, scraping or deburring soft materials such as plastic, aluminum.
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Swivel Blades Light Duty (B)
Swivel Blades Light Duty (B)
ใบมีดงอ ใบมีดสำหรับอุปกรณ์ลบคม ขนาดก้าน 2.6มม (ขนาด B)
สามารถใช้ได้กับด้ามจับขนาด 2.6มม ทั้ง Grattec และ Noga
Grattec Scraper Blades D
Grattec Scraper Blades D
Scraper blade for sharp scraping and mold surface scraping, used with Grattec and Noga metal surface scraping handle, size D
Mitutoyo 500 ดิจิตอล เวอร์เนียแคลิปเปอร์
Mitutoyo 500 Digital Vernier Caliper
Mitutoyo ABSOLUTE ดิจิมาติกแคลิปเปอร์ series 500
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
Mitutoyo 513 ไดอัลเทสอินดิเคเตอร์
Mitutoyo 513 Dial Test Indicator
Mitutoyo ไดอัล เทสอินดิเคเตอร์ เข็มไดอัลรุ่น series: 513-40
รุ่น 0.01×0.8mm และ 0.002×0.2mm
รุ่น 0.01×0.8mm และ 0.002×0.2mm
Mitutoyo 530 เวอร์เนียแคลิปเปอร์
Mitutoyo 530 Vernier Caliper
Mitutoyo เวอร์เนียแคลิปเปอร์ series 530
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
Mitutoyo 543 ดิจิตอล ไดอัลเกจ
Mitutoyo 543 Digital Dial Gage
Mitutoyo ดิจิตอล อินดิเคเตอร์
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
Mitutoyo ไดอัลเกจ
Mitutoyo Dial Gage
Mitutoyo ไดอัลเกจ อ่านค่า 0.01มม และ 0.001มม
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
Grattec Box
Grattec Box
ชุดเครื่องมือ Grattec Box รวบรวมใบมีดชนิดต่างๆไว้ด้วยกันในราคาประหยัด พร้อมกล่องใส่สวยงาม พกพาจัดเก็บสะดวก
Includes:
- Double Burr DB2000GT
- Universal Handle EL1000GT
- Blade Holder EL0103GT
- Blade Holder EL0200GT
- Blade Holder EL0300GT+GT-C20
- Blade Holder EL0400GT+GT-N80K
- Blade Holder EL0500GT+GT-D50
- Blade Holder EL0500GT+GT-D66
- Hex Key 1.5mm GT-DH0005
- Countersink Blade 12mm GT-C12
- One each blade: GT-B10, GT-B20, GT-E100, GT-E200, GT-E300
Includes:
- Double Burr DB2000GT
- Universal Handle EL1000GT
- Blade Holder EL0103GT
- Blade Holder EL0200GT
- Blade Holder EL0300GT+GT-C20
- Blade Holder EL0400GT+GT-N80K
- Blade Holder EL0500GT+GT-D50
- Blade Holder EL0500GT+GT-D66
- Hex Key 1.5mm GT-DH0005
- Countersink Blade 12mm GT-C12
- One each blade: GT-B10, GT-B20, GT-E100, GT-E200, GT-E300
OSG Straight Flute Tap
OSG Straight Flute Tap
OSG EX-POT high speed steel HSSE tap, straight flute for tapping through hole.
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
Grattec Hand Scrapers
Grattec Hand Scrapers
Scraper kit and scraper blade for sharp scraping and mold surface scraping Kit with yellow Grattec handle and replaceable blade
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Grattec Hand Countersinks
Grattec Hand Countersinks
Counter Sync Bit Removal Kit Manual Hole Deburring Handle Grattec Yellow Handle The counter sync head can be changed to other sizes.
Swivel Blades with Safety Cap
Swivel Blades with Safety Cap
Plastic Safety Cap prevent the blade from scratching work. Ideal for deburring easy to scratch materials such as aluminum, plastic, other decorative work pieces.
Specialty Tools and Blades (L)
Grattec Specialty Deburring Blades L
Specialty Tools and Blades (L) for removing burrs on side of sheet metals, making chamfer, relieve narrow slots.
Piloted Countersinks (90°)
Piloted Countersinks (90°)
90degree Magafor Piloted Countersinks for boring tapered screw cap holes.
NF-E66023 / DIN 1866 / ISO
Ball Micro End Mills
Ball Micro End Mills
Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.
Short and Extra Short model.
Mitutoyo 505 แคลิปเปอร์ รุ่นไดอัล
Mitutoyo 505 Dial Caliper
Mitutoyo Dial Vernier Caliper series 505
Grattec 7UP Kit
Grattec 7UP Kit
A collection of 7 popular tools in one easy to carry box. Provides solutions for most deburring applications.
Includes:
- GT-Countersink EL1300GT
- GT-Medium Triangular scraper EL1600GT
- GT "B" Set EL1100GT
- Rapid Burr RB1000GT
- GT-Keyway Burr EL1400GT
- "E" set EL1200GT
- GT- Internal Scraper EL1501GT
Includes:
- GT-Countersink EL1300GT
- GT-Medium Triangular scraper EL1600GT
- GT "B" Set EL1100GT
- Rapid Burr RB1000GT
- GT-Keyway Burr EL1400GT
- "E" set EL1200GT
- GT- Internal Scraper EL1501GT
Aluminum Handle Scraper
Aluminum Handle Scraper
Adjustable Scraper trimming and deburring hand tool SC8000GT.
Black anodized hex 12mm aluminum handle come with T80 blade.
Center Drill (Form A) Old JIS
Long Center Drill (Form A)
Center Drill Old Japanese JIS standard 60 degree available in HSSE.