EN 
TH 
Boring Head BHB
Boring Head BHB
GIN BHB Boring Head with Shank set including the Boring Head and shank type of your choice (BT50 / NT40).
Boring head BHB type can bore hole diameter 10-250mm.
with 0.01mm. adjustment.
Boring head BHB type can bore hole diameter 10-250mm.
with 0.01mm. adjustment.
Vertical Hold-Down Toggle Clamp
Vertical Hold-Down Toggle Clamp
Vertical Hold-Down Toggle Clamp with nylon tip to prevent tool damage. The tip can be removed if needed.
Z-Axial Height Setter
Z-Axial Height Setter
Z-Axial height setting device with preset height of 50mm and 100mm. Magnetic base type are essential for use on milling and lathe machines.
Drill Resharpening Machine
Drill Resharpening Machine
Drill Grinder, resharpener, machine is a simple to use machine that can help regrinding used drill, or to form a special drill. The motor can run continuously over 1 hour.
- Accuracy and easy to operate, no experience required.
- Can make special drill with this machine.
- High efficiency.
- Long life.
Bar-Type Demagnetizer
Bar-Type Demagnetizer
Bar type for demagnetizing stamping die or injection mold while they are open. It can easily insert inside the opening.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Air Grinders
Air Grinders
General purpose air grinder, light and high speed. Suitable for light grinding with 3mm shank mounted points.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
ElectroPermanent Magnetic Chuck (A)
ElectroPermanent Magnetic Chuck (A)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Model: 03EEPM–A
Pole : 35 x 35mm
Flux Line : 15mm
Magnetic Force : 580±5% kgf /4 Poles
Magnetic Square Block
Magnetic Square Block
Permanent Magnetic Square Block with V grooves, magnetic on top and sides.
Suitable for precision work, useful for both plate and round workpiece.
Magnetic Base Work Lamp
Magnetic Base Work Lamp
Working Lamp with Magnetic Base for working station or small machine lightning.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
Model 01SRT-311PB For generally lighting the work area, easy to move around and placing.
- Magnetic Base with on/off switch
- 60 W light bulb
- 220 V
Magnet Oil-Type Protractor
Magnet Oil-Type Protractor
Magnetic Oil Type Protractor
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Easy to use oil type protractor with magnet, simply attach the magnet side to object and read the scale. Come with a detachable ruler.
Mitutoyo Dial Depth Gage
Mitutoyo Dial Depth Gage
Mitutoyo Dial Bore Gages
Mitutoyo Dial Bore Gages
Universal Facing and Boring Set
Universal Facing and Boring Set
Universal tool for facing and boring in one multi-purpose tool holder. Each set come with complete range of boring bar, boring head, and the shank NT40.
Vertical Hold-Down Toggle Clamp (Solid Arm)
Vertical Hold-Down Toggle Clamp (Solid Arm)
Tapped hole on the end of solid arm for choosing your own hold down head.
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose ECE
ECE Metal Hose cooling system come completed
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
with on/off magnetic base holding power 80kg.
*Metal hose without magnetic base also available.
End Mill ReSharpening Machine
End Mill ReSharpening Machine
End Mill grinder, re-sharpener, machine is a simple to use machine that can help re-grinding used end mills.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Handle-Type Demagnetizer
Handle-Type Demagnetizer
Handle-Type Demagnetizer small light-weight demagnetizer. Suitable for big machines, steel plates, molds where the object is not easily lift.
Safety Feature : Automatic Temperature Protection
90% Duty Cycle: Operate 20min / Cooldown 20min
Heavy Duty Air Grinder
Heavy Duty Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Suitable for heavy usage such as die grinding. Hold 3mm shank mounted points. Come with Ø3.0mm collet
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Mold Clamp
Mold Clamp
Mold Clamp 11MC series for variable height clamping of mold and die base. Mold Clamp do not require additional support. For using with T-Slot table, use with T-Nut.
- Normal type come with threaded studs, for use with T-Nut or install into threaded holes.
- T-Bolt type (2nd table) follow with code A or B, come with T-Bolt ready for use with T-Slot tables.
ElectroPermanent Magnetic Chuck (B)
ElectroPermanent Magnetic Chuck (B)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Model: 03EEPM–B
Pole : 50 x 50mm
Flux Line : 25mm
Magnetic Force : 1250±5% kgf /4 Poles
Paired Magnetic V-Block Key-Type
Paired Magnetic V-Block Key-Type
Earth-Chain ECE-507 Paired Magnetic V-Block Key-Type, this type use hex key to turn magnetic force on/off. Prevent accidentally turning the magnetic power off, and can be use in smaller space. The key is provided with the set, V-Block come in a pair.
Mitutoyo 500 ดิจิตอล เวอร์เนียแคลิปเปอร์
Mitutoyo 500 Digital Vernier Caliper
Mitutoyo ABSOLUTE ดิจิมาติกแคลิปเปอร์ series 500
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
Mitutoyo 513 ไดอัลเทสอินดิเคเตอร์
Mitutoyo 513 Dial Test Indicator
Mitutoyo ไดอัล เทสอินดิเคเตอร์ เข็มไดอัลรุ่น series: 513-40
รุ่น 0.01×0.8mm และ 0.002×0.2mm
รุ่น 0.01×0.8mm และ 0.002×0.2mm
Mitutoyo 530 เวอร์เนียแคลิปเปอร์
Mitutoyo 530 Vernier Caliper
Mitutoyo เวอร์เนียแคลิปเปอร์ series 530
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
Mitutoyo 543 ดิจิตอล ไดอัลเกจ
Mitutoyo 543 Digital Dial Gage
Mitutoyo ดิจิตอล อินดิเคเตอร์
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
Mitutoyo ไดอัลเกจ
Mitutoyo Dial Gage
Mitutoyo ไดอัลเกจ อ่านค่า 0.01มม และ 0.001มม
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
Vertical Hold-Down Toggle Clamp (Straight Base)
Vertical Hold-Down Toggle Clamp (Straight Base)
Straight base hold down toggle clamp.
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine
End Mill & Drill Cutter Machine is a simple to use machine that can help re-using dull end mills and drill by cutting off the head to expose sharper edge.
- Accuracy and easy to operate, no experience required.
- High efficiency.
- Long life.
Cutting Tool Demagnetizer
Cutting Tool Demagnetizer
Demagnetize cutting tools without removing it from machine. Help removing chips from tools.
20% Duty Cycle: Operation time 1 minute with 4 minute rest time.
Dual-Collet Air Grinder
Dual-Collet Air Grinder
Heavy Duty Air Grinder. High torque and high speed air grinder. Can hold both 3mm and 6mm shanks by changing its collets which come with the tool.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
*Maintenance air system often to lengthen the lives of Air Tools.
**Grinding mounted point shown in the picture for demonstration purpose only, not included in the Air Grinder package.
Forged Goose Neck Clamp
Forged Goose Neck Clamp
Forged Goose Neck shaped clamp. Made with forged steel for heavy duty works.
Forged Mold Clamp
Forged Mold Clamp
Forged Mold Clamp 11MCF serie for variable height clamping of mold and die base. The clamp body is forged for extra strength. Mold Clamp do not require additional support.
- Normal type come with threaded studs, for use with T-Nut or install into threaded holes.
- T-Bolt type (2nd table) follow with code A or B, come with T-Bolt ready for use with T-Slot tables.
ElectroPermanent Magnetic Chuck (D)
ElectroPermanent Magnetic Chuck (D)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Model: 03EEPM–D
Pole : 70 x 70mm
Flux Line : 40mm
Magnetic Force : 2800±5% kgf /4 Poles
Paired Magnetic V-Block
Paired Magnetic V-Block
Earth-Chain ECE-510 paired permanent magnetic V-block, useful in holding of long workpiece for measuring or grinding. Sold in pair (2pcs/set).
Mitutoyo 505 แคลิปเปอร์ รุ่นไดอัล
Mitutoyo 505 Dial Caliper
Mitutoyo Dial Vernier Caliper series 505
Electromagnetic Chuck Controller
Electromagnetic Chuck Controller
Vertical Hold-Down Toggle Clamp (T-Handle)
Vertical Hold-Down Toggle Clamp (T-Handle)
Hold down toggle clamp with t handle
Surface Air Grinder 45°
Surface Air Grinder 45°
เครื่องเจียรลม สำหรับการเจียรผิวหน้าชิ้นงาน หรือการลบมุมชิ้นงานทั่วไป หัวเจียรทำมุม 45องศา มาพร้อมกับ หินเจียรถ้วย และ กระดาษทราย รุ่นสำหรับงานหนัก แข็งแรง เหมาะสำหรับขัดผิวหน้างาน ทำมุม ลบคม ชิ้นงานขนาดใหญ่
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Standard Demagnetizer
Standard Demagnetizer
Table top type Standard Demagnetizer for industrial use, suitable for demagnetizing general components or spare parts.
For workpiece width under 110 mm.
100% Duty Cycle: Operate 24 hours
Tapped End Mold Clamp
Tapped End Mold Clamp
Tapped End Mold Clamp 11TTUC for clamping mold and die base, the clamping height is adjustable. Set included the clamp and threaded support.
ElectroPermanent Magnetic Chuck (E)
ElectroPermanent Magnetic Chuck (E)
Earth-Chain Electro-Permanent Magnetic Chuck standard model EEPM for milling large workpiece.
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Model: 03EEPM–E
Pole : 92 x 92mm
Flux Line : 50mm
Magnetic Force : 4800±5% kgf /4 Poles
Magnetic V-Block
Magnetic V-Block
Earth-Chain permanent magnetic v-block for holding of round, rod or small workpiece. High magnetic holding force type, can be turned on/off.
Hold-Down Toggle Clamp (Right Angle Base)
Hold-Down Toggle Clamp (Right Angle Base)
Vertical hold-down toggle clamp with right angle base.
Permanent Magnetic Clamping Block
Permanent Magnetic Clamping Block
Permanent magnet for machining large and medium work pieces. These are not suitable for small pieces.
Please choose from Holding Power and Minimum Thickness Required. The size of work piece must be larger than the area of 2 blocks.
Please choose from Holding Power and Minimum Thickness Required. The size of work piece must be larger than the area of 2 blocks.
Stepped Strap Clamp
Stepped Strap Clamp
Stepped Strap Clamp 11TSSC serie for work holding on machines and molds.
Surface Air Grinder 90°
Surface Air Grinder 90°
Surface grinder with 90 degree angle head. Suitable for surface or corner grinding. The box come with a cup wheel and paper discs. For heavy duty usage. Recommend for surface grinding, chamfering, deburring, and welded surfaces.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.
Come with abrasive wheel cup, and paper disc. Use M7 screw shaft for mounting.
*Maintenance air system often to lengthen the lives of Air Tools.