EN 
TH 
Hardness Tester Files
Hardness Tester Files
Tsubosan Hardness Tester Files: a simple experimental tools for hardness between HRC40 ～ 65.
Very convenient pocket size hardness tester. Each file is color coded, and hardness is printed onto handle.
Using direction : pick the hardest file and scratch onto testing surface, if scratch line appear then use softer file until no scratch line appear. The hardness of the testing object then should be between the non-scratching file and the scratching file.
Very convenient pocket size hardness tester. Each file is color coded, and hardness is printed onto handle.
Using direction : pick the hardest file and scratch onto testing surface, if scratch line appear then use softer file until no scratch line appear. The hardness of the testing object then should be between the non-scratching file and the scratching file.
Articulated Holder (FAT)
NOGA Articulated Holder (FAT)
Fine Adjustment Top NOGA Articulated Holder with magnetic stand for holding of dial test indicator.
- On/Off powerful magnetic base
- NOGA central lock mechanism
- Fine adjustment on top of the holder
Pin Gage Box
Metric Pin Gage Box
Vermont Gage's Box Set most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 0.02mm set increments
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
Noga Diamond File Set
Noga Diamond File Set
Noga diamond needle file, and scrapers set. The YT handle in this set can hold all the needle files, and the scraper. The set is best suit for machinists and tool/die makers.
- 5 Diamond Needle File : Round, Half Round, Square, Flat and Triangle. Grit Size D126 (#120/140)
- D75 and T80 Noga scrapers blades.
- YT1000 universal needle handle.
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Chip Hook
Chip Hook
Removing chips and clean the chip tray on machine. The NOGA Chip Hook provide safety, and high productivity to machines such as lathe and milling.
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose
JETON magnetic base coolant hose available in single hoses, two hoses, three hoses.
*The hose can be customized with adjustable coolant hose packs, purchase separately
*The hose can be customized with adjustable coolant hose packs, purchase separately
Hydraulic Machine Vise
Hydraulic Machine Vise
Autowell HP hydraulic powered clamping mechanism. Hydraulic Machine Vise provides higher clamping force than regular machine vises for use on manual milling machine.
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
Light Green Spring (Ultra-High Deflection)
Light Green Spring (Ultra-High Deflection)
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Mitutoyo Dial Depth Gage
Mitutoyo Dial Depth Gage
Mitutoyo Dial Bore Gages
Mitutoyo Dial Bore Gages
Articulated Holder (FAB)
NOGA Articulated Holder (FAB)
Fine Adjustment Bottom NOGA Articulated Holder with magnetic stand for holding of dial test indicator.
- On/Off powerful magnetic base
- NOGA central lock mechanism
- Fine adjustment on base of the holder
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
Individual Pin Gage
Metric Individual Pin Gage
Vermont Gage's Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
*Please specify pin gage sizes you need with ordering
Vermont Gage products are supplied with Certificate of Accuracy.
- Metric size (millimeter)
- Class ZZ
- Material: Tool Steel
- 50mm long
- Marked with size (1.5mm or bigger)
- NIST traceable
*Please specify pin gage sizes you need with ordering
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
Light Blue Spring (Super-High Deflection)
Light Blue Spring (Super-High Deflection)
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Mitutoyo 500 ดิจิตอล เวอร์เนียแคลิปเปอร์
Mitutoyo 500 Digital Vernier Caliper
Mitutoyo ABSOLUTE ดิจิมาติกแคลิปเปอร์ series 500
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
Mitutoyo 513 ไดอัลเทสอินดิเคเตอร์
Mitutoyo 513 Dial Test Indicator
Mitutoyo ไดอัล เทสอินดิเคเตอร์ เข็มไดอัลรุ่น series: 513-40
รุ่น 0.01×0.8mm และ 0.002×0.2mm
รุ่น 0.01×0.8mm และ 0.002×0.2mm
Mitutoyo 530 เวอร์เนียแคลิปเปอร์
Mitutoyo 530 Vernier Caliper
Mitutoyo เวอร์เนียแคลิปเปอร์ series 530
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
Mitutoyo 543 ดิจิตอล ไดอัลเกจ
Mitutoyo 543 Digital Dial Gage
Mitutoyo ดิจิตอล อินดิเคเตอร์
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
Mitutoyo ไดอัลเกจ
Mitutoyo Dial Gage
Mitutoyo ไดอัลเกจ อ่านค่า 0.01มม และ 0.001มม
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
Articulated Holder (FAT & FAB)
Articulated Holder (FAT & FAB)
Fine Adjustment Top & Bottom NOGA Articulated Holder with magnetic stand for holding of dial test indicator.
- On/Off powerful magnetic base
- NOGA central lock mechanism
- Fine adjustment on top and base of the holder
Pin Gage Box (Inch)
Inch Pin Gage Box
Vermont Gage's inch size Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
Vermont Gage products are supplied with Certificate of Accuracy.
- Inch
- Class ZZ
- Material: Tool Steel
- 0.001'' set increments
- 2'' long
- Marked with size (0.0605'' or bigger)
- NIST traceable
NogaCool
NogaCool
NogaCool coolant hose with on/off magnetic base.
NOGA coolant parts can be purchased separately.
NOGA coolant parts can be purchased separately.
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Ivory White Spring (High Deflection)
Ivory White Spring (High Deflection)
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Piloted Countersinks (90°)
Piloted Countersinks (90°)
90degree Magafor Piloted Countersinks for boring tapered screw cap holes.
NF-E66023 / DIN 1866 / ISO
Ball Micro End Mills
Ball Micro End Mills
Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.
Short and Extra Short model.
Mitutoyo 505 แคลิปเปอร์ รุ่นไดอัล
Mitutoyo 505 Dial Caliper
Mitutoyo Dial Vernier Caliper series 505
Noga Comparator Stand
Noga Comparator Stand
Comparator stand microlapped plate for thickness testing with dial indicator.
DIN876 grad 00 plate
DIN876 grad 00 plate
Articulated Holder Set
NOGA Articulated Holder Set
NOGA FAT Articulated Holder Set with dial gage. Magnetic stand for holding of dial test indicator.
- On/Off powerful magnetic base
- NOGA central lock mechanism
- Fine adjustment on top of the holder
- Included NOGA dial gage / dial incidator
Noga MINICOOL
Noga MINICOOL
Noga MINICOOL playing unit is using the VENTURI principle to spray an air + liquid mixture. Can control both the air flow rate and liquid rate. Spraying coolant for cooling without flooding.
Center Drill (Form A) Old JIS
Long Center Drill (Form A)
Center Drill Old Japanese JIS standard 60 degree available in HSSE.
Carbide NC Drill 90°
Carbide NC Drill 90°
Carbide NC Drill (90°) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
Long 3F Countersinks (90°)
Long 3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
Lockwell Machine Vise
Lockwell Machine Vise
Autowell AMC vise suitable for milling machine work clamping with high clamping force, and precision machining from Lockwell anti-lifting mechanism.
This vise is Match Vise and can be use in row for vise of the same model due to precision vise base height.
Lockwell : Anti workpiece lifting mechanic
Body Material : FCD-60
Body Hardness : HS65
Jaw Material : S50C
Jaw Hardness : HRC54
Bed Height : +- 0.012
Individual Pin Gage (Inch)
Inch Individual Pin Gage
Vermont Gage's inch size Individual Pin Gage most suitable for part inspection, measure hole size, slot width, Go/NoGo inspection etc.
Vermont Gage products are supplied with Certificate of Accuracy.
*Please specify pin gage sizes you need with ordering
Vermont Gage products are supplied with Certificate of Accuracy.
- Inch
- Class ZZ
- Material: Tool Steel
- 2'' long
- Marked with size (0.0605'' or bigger)
- NIST traceable
*Please specify pin gage sizes you need with ordering