EN 
TH 
Center Drill (Form A)
Center Drill (Form A)
Standard center drills (Form A) 60° Magafor
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
Available in materials
High Speed Steel (HSS)
High Speed Steel with Cobalt (HSSE)
Carbide
Matching Standards : ISO / NFE 66051-A / DIN 333-A / JIS-1
DUO-MAG Double NC Drill
DUO-MAG Double NC Drill
Magafor double NC drill 'DUO-MAG' combining two NC Spotting Drills into one economically drill.
Step Drills Before Thread
Step Drills Before Thread
Drill and countersink hole before threading standard M thread. Two in one drill bit to save production time and cost.
3F Countersinks (90°)
3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C for deburring and chamfering holes and edges. The design is suitable for hard material such as metals. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
NT Face Mill Holder
NT Face Mill Holder
NT shank Face Mill holder, can hold metric type face mills (FMB).
Magnetic Base Coolant Hose
Magnetic Base Coolant Hose
JETON magnetic base coolant hose available in single hoses, two hoses, three hoses.
*The hose can be customized with adjustable coolant hose packs, purchase separately
*The hose can be customized with adjustable coolant hose packs, purchase separately
Hand Reamers
Hand Reamers
High speed steel spiral flute hand reamer Magafor 670. Available in metric and inch sizes.
DIN 206-B / NFE 066019
DIN 206-B / NFE 066019
ER Collet
ER Collet
ER Spring Collet DIN6499 for holding endmill on milling machine.
Available individually or in set. Set of ER collet order code at the bottom of table
Types : ER08, ER11, ER16, ER20, ER25, ER32, ER40, ER50
Collet Sets : included all range of the collet series
Available individually or in set. Set of ER collet order code at the bottom of table
Types : ER08, ER11, ER16, ER20, ER25, ER32, ER40, ER50
Collet Sets : included all range of the collet series
Counterbores 180°
Counterbores 180°
Counterbore with 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Mitutoyo Dial Depth Gage
Mitutoyo Dial Depth Gage
Mitutoyo Dial Bore Gages
Mitutoyo Dial Bore Gages
Drill Tapper Set
Drill Tapper Set
Drill Tapper Set D24 and D33 for tapping and drilling in one set. The tapper holder torque can be adjust to HIGH or LOW depend on the material.
1 SET included.
- 1 Tapper Holder (MT Shank)
- 1 Drill Chuck + Adapter
- 2 MT Sleeves
- 6 Tap Collets
Extra collets, sleeve, tap holder, drill chuck can be sold individually.
1 SET included.
- 1 Tapper Holder (MT Shank)
- 1 Drill Chuck + Adapter
- 2 MT Sleeves
- 6 Tap Collets
Extra collets, sleeve, tap holder, drill chuck can be sold individually.
Center Drill with Flat (Form A)
Center Drill (Form A) Non Standard
Center Drill 60° with Flat (Form A) for using with automatic center drilling machine.
NC Drill 90°
NC Drill 90°
90 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
NFE 66052 / ISO 10898
Step Drills Before Thread (Carbide)
Step Drills Before Thread (Carbide)
Drill and countersink hole before threading standard M thread.
Special harder carbide model for mass production.
BT Face Mill Holder
BT Face Mill Holder
BT shank Face Mill holder, can hold metric type face mills (FMB).
Hand Reamer Paris Type
Hand Reamer Paris Type
High speed steel Magafor 675 straight flute hand reamers paris type. Half of the tool has straight cutting flute and another bearing no flute surface for smoothing reamed surface.
NFE 74112
NFE 74112
Counterbores Taper Shank 180°
Counterbores Taper Shank 180°
Counterbores with Taper Shank (Morse Taper) 180degree for boring screw cap holes or ejector pin head holes for mould.
NF-E66024 / DIN 373 / ISO
Mitutoyo 500 ดิจิตอล เวอร์เนียแคลิปเปอร์
Mitutoyo 500 Digital Vernier Caliper
Mitutoyo ABSOLUTE ดิจิมาติกแคลิปเปอร์ series 500
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
ไม่ต้องเซ็ตศูนย์หลายๆครั้ง ด้วยระบบของ absolute สามารถวัดงานได้ทันทีเมื่อกดเปิด
- หน้าจอ LCD ใหญ่และอ่านง่าย
- Functions: Zero/ABS, ON/OFF, Inch/Metric Conversion
Mitutoyo 513 ไดอัลเทสอินดิเคเตอร์
Mitutoyo 513 Dial Test Indicator
Mitutoyo ไดอัล เทสอินดิเคเตอร์ เข็มไดอัลรุ่น series: 513-40
รุ่น 0.01×0.8mm และ 0.002×0.2mm
รุ่น 0.01×0.8mm และ 0.002×0.2mm
Mitutoyo 530 เวอร์เนียแคลิปเปอร์
Mitutoyo 530 Vernier Caliper
Mitutoyo เวอร์เนียแคลิปเปอร์ series 530
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
- ความยาว 150มม / 200มม / 300มม
- Measure OD,ID,depth,steps
- Clamping screw on top
- อ่านค่า : เมตริก / นิ้ว
Mitutoyo 543 ดิจิตอล ไดอัลเกจ
Mitutoyo 543 Digital Dial Gage
Mitutoyo ดิจิตอล อินดิเคเตอร์
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
ABSOLUTE Digimatic Indicator
- Metric หรือ Inch/Metric switch
- ISO/JIS type with back lug
- IP42
Mitutoyo ไดอัลเกจ
Mitutoyo Dial Gage
Mitutoyo ไดอัลเกจ อ่านค่า 0.01มม และ 0.001มม
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
1044A 0.01mm 5/1mm
2046A 0.01mm 10/1mm
2109A-10 0.001mm 1/0.2mm
Long Center Drill (Form A)
Center Drill with Flat (Form A)
Long type Center Drills Form A 60 degree longest at 200mm.
NC Drill 120°
NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
NFE 66052 / ISO 10898
NFE 66052 / ISO 10898
BT Drill Chuck Holder
BT Drill Chuck Holder
BT Drill Chuck Holder for holding jacob taper (JT) drill chuck. Available for machine taper BT30 , BT40 , BT50.
Expanding Reamers
Expanding Reamers
Highspeed steel straight flute hand reamer Magafor 677. Expanding hand reamers expansion size 0.01 x D(min) by moving the knob on the reamer top.
NFE 066003
NFE 066003
Step Drill 90°
Step Drill 90°
Step Drill 90Deg for drilling standardized tapered capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
Piloted Countersinks (90°)
Piloted Countersinks (90°)
90degree Magafor Piloted Countersinks for boring tapered screw cap holes.
NF-E66023 / DIN 1866 / ISO
Ball Micro End Mills
Ball Micro End Mills
Magafor carbide ball micro precision end mills. Super micro end mills as small as diameter 0.10mm.
Short and Extra Short model.
Mitutoyo 505 แคลิปเปอร์ รุ่นไดอัล
Mitutoyo 505 Dial Caliper
Mitutoyo Dial Vernier Caliper series 505
Center Drill (Form A) Old JIS
Long Center Drill (Form A)
Center Drill Old Japanese JIS standard 60 degree available in HSSE.
Carbide NC Drill 90°
Carbide NC Drill 90°
Carbide NC Drill (90°) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
By drilling hole using smaller diameter drill over the 90 degree NC Spotting Drill hole will provide an already chamferred hole.
Long 3F Countersinks (90°)
Long 3F Countersinks (90°)
Countersink 90Degree 3Flutes DIN 335-C with long and extra long shank for deburring and chamfering deep holes. The special design include fast chip flow due to wide flutes, and higher precision. We also have the widest selection of Countersink tools.
NT Drill Chuck Holder
NT Drill Chuck Holder
NT Drill Chuck Holder for holding jacob taper (JT) drill chuck. Available for machine taper NT30 , NT40 , NT50.
Step Drills Long Type 90°
Step Drills Long Type 90°
Drilling standardized tapered 90° capscrews hole in one operation. This simple tool can reduce time and save cost from drilling and countersinking.
MT ER Collet Chuck
MT ER Collet Chuck
Milling chuck ER collet system with MTB Morse Taper shank.
Hand Taper Pin Reamers
Hand Taper Pin Reamers
High speed steel taper reamer Magafor 700 / 720. Hand Taper Pin Reamer for hand reaming of tapered holes. Available in sprial flutes and straight flutes. Reaming taper 2% or 1:50 or 1° 08´
DIN 9 / NFE 066011
DIN 9 / NFE 066011
Micro End Mills
Micro End Mills
Magafor Micro Precision End Mills super micro end mills as small as diameter 0.10mm.
Flow Control Unit
Flow Control Unit
Flow Control Unit (Manifold) for machine tool water, and air flow management. Easy to install, and convenient to maintenance. The unit can control both air flow and liquid flow.
The hose can be easily change and modify with Jeton hose system.
The hose can be easily change and modify with Jeton hose system.
Center Drill (Form A) Old JIS
Center Drill (Form A) Old JIS
Carbide NC Drill 120°
Carbide NC Drill 120°
120 degree NC Spotting Drill (Point Drill) for use in place of center drill in CNC / NC machining. Provide longer tool life and longer shank.
By drilling hole using smaller diameter drill over the 120 degree NC Spotting Drill hole will provide a stability for drill.
By drilling hole using smaller diameter drill over the 120 degree NC Spotting Drill hole will provide a stability for drill.
High Precision Machine Reamers
High Precision Machine Reamers
Spiral flute high precision machine reamers Magafor 600 / 8600. High speed steel with cobalt and carbide for hard material.
Selection 0.1mm size increment.
DIN 212-B / NFE 066014
Selection 0.1mm size increment.
DIN 212-B / NFE 066014